Skip to content
MappleCare Community ↗
Solved Question iPad & iPadOS Support

[Solved] iPad Pro 13″ M4 Apple Pencil Pro Squeeze & Hover Gesture Failure (iPadOS 18.0.1) – Verified Troubleshooting

Started by Nancy Koehler • November 15, 2026 at 12:50 pm • 1 Community Replies • 2 Participants

Home › Forums › iPad & iPadOS Support › [Solved] iPad Pro 13″ M4 Apple Pencil Pro Squeeze & Hover Gesture Failure (iPadOS 18.0.1) – Verified Troubleshooting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #27014
    Nancy Koehler
    Senior Specialist (Lvl 8)
    Diagnostic Hardware Specs: iPad Pro 13″ M4 | OS Version: iPadOS 18.0.1 | Archive Source: Apple Support Community #256467292

    I am running into a persistent issue on my iPad Pro 13″ M4 running iPadOS 18.0.1.
    Whenever the machine encounters Digitizer sensor BLE calibration handshake desynchronization, the following diagnostic log appears in Console:

    PencilService: [Bluetooth] Haptic squeeze sensor payload CRC mismatch on peripheral 0x411c

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Air 13″ M3 (16GB) | Apple GSX Terminal | Thermal Camera Seek Compact | Toronto, ON
    Apple Certified Service Technician (ACiT / ACSP) | "Verified Apple Discussions Archive"
    #27015
    Brandon Wagner
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Forgetting Bluetooth device, cleaning magnetic inductive strip, and recalibrating Squeeze threshold.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In Settings > Bluetooth, tap (i) next to Apple Pencil and select Forget This Device.
    2. Wipe magnetic charging edge of iPad and flat edge of Apple Pencil with microfiber cloth.
    3. Force restart iPad (Vol Up, Vol Down, hold Top button). Re-attach Pencil to recalibrate.

    Following this procedure restores full stability with zero recurring log errors.

    Mac Studio M2 Ultra (128GB) | ASUS ProArt PA32UCG-K | OWC ThunderBay 8 | Austin, TX
    Apple Certified Support Professional (ACSP) | Final Cut Pro / DaVinci Colorist & Editor
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.