Skip to content
[Solved] iPhone 14 Pro eSIM Quick Transfer Activation Stuck in Loop (iOS 18.1) – Verified TroubleshootingMappleCare Community ↗
Solved Question iPhone & iOS Help Desk

[Solved] iPhone 14 Pro eSIM Quick Transfer Activation Stuck in Loop (iOS 18.1) – Verified Troubleshooting

Started by Christopher Day • November 18, 2026 at 5:02 pm • 1 Community Replies • 2 Participants

Home › Forums › iPhone & iOS Help Desk › [Solved] iPhone 14 Pro eSIM Quick Transfer Activation Stuck in Loop (iOS 18.1) – Verified Troubleshooting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #94096
    Kullanıcı ProfiliChristopher Day
    Community Contributor
    Diagnostic Hardware Specs: iPhone 14 Pro | OS Version: iOS 18.1 | Archive Source: Apple Support Community #256112516

    I am running into a persistent issue on my iPhone 14 Pro running iOS 18.1.
    Whenever the machine encounters Carrier SM-DP+ server profile handshake timeout, the following diagnostic log appears in Console:

    CommCenter: [eSIM] Remote profile download timeout from SM-DP+ server for EID 890490324082

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 14″ M4 Pro (48GB) | CalDigit TS4 | Oslo, Norway
    HomeKit / Matter IoT Integrator | "Verified Apple Discussions Archive"
    #94097
    Kullanıcı ProfiliMathieu Rogers
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Deleting stale provisioning profile, resetting network settings, and requesting manual carrier QR code push.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In Settings > Cellular, select the pending line and tap Delete eSIM.
    2. Reset Network Settings under Settings > General > Transfer or Reset iPhone.
    3. Request fresh activation QR code via carrier self-service portal using device IMEI2 and EID.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Pro 14″ M4 Pro (48GB) | CalDigit TS4 | Montreal, QC
    Apple Certified Support Professional (ACSP) | Mac Sysadmin & DevOps Engineer
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.