Skip to content
[Solved] iPhone 16 Plus Camera Control Button Accidental Palm Activations (iOS 18.0.1) – Verified TroubleshootingMappleCare Community ↗
Solved Question iPhone & iOS Help Desk

[Solved] iPhone 16 Plus Camera Control Button Accidental Palm Activations (iOS 18.0.1) – Verified Troubleshooting

Started by Diane Patel • November 16, 2026 at 9:51 pm • 1 Community Replies • 2 Participants

Home › Forums › iPhone & iOS Help Desk › [Solved] iPhone 16 Plus Camera Control Button Accidental Palm Activations (iOS 18.0.1) – Verified Troubleshooting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #51788
    Kullanıcı ProfiliDiane Patel
    Senior Specialist (Lvl 8)
    Diagnostic Hardware Specs: iPhone 16 Plus | OS Version: iOS 18.0.1 | Archive Source: Apple Support Community #256340488

    I am running into a persistent issue on my iPhone 16 Plus running iOS 18.0.1.
    Whenever the machine encounters Capacitive sensor threshold over-sensitivity in one-handed grip, the following diagnostic log appears in Console:

    CoreMotion: [CameraControl] Pressure register 0x2990 registered threshold exceedance in portrait hold

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 14″ M4 Pro (48GB) | iPhone 15 Pro | iPad Air M2 | Calgary, AB
    iOS / Swift Engineer | "Verified Apple Discussions Archive"
    #51789
    Kullanıcı ProfiliLeonard Mason
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Tuning force pressure settings to Firmer and changing launch trigger from Single Click to Double Click.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Go to Settings > Accessibility > Camera Control. Change Pressure and Light Press Sensitivity to Firmer.
    2. In Settings > Camera > Camera Control, change Launch Camera to Double Click.
    3. Disable swipe gesture adjustments if exposure sliding is not required.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Air 15″ M3 (24GB) | CalDigit SOHO | Sydney, NSW
    Apple Certified Support Professional (ACSP) | Apple Silicon Architecture Lead
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.