Skip to content
[Solved] iPhone 16 Pro Max encountering Camera Control Button Accidental Palm Activations after update (iOS 18.0.1)MappleCare Community ↗
Solved Question iPhone & iOS Help Desk

[Solved] iPhone 16 Pro Max encountering Camera Control Button Accidental Palm Activations after update (iOS 18.0.1)

Started by Wei Walker • November 17, 2026 at 6:45 pm • 1 Community Replies • 2 Participants

Home › Forums › iPhone & iOS Help Desk › [Solved] iPhone 16 Pro Max encountering Camera Control Button Accidental Palm Activations after update (iOS 18.0.1)

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #72254
    Kullanıcı ProfiliWei Walker
    Community Contributor
    Diagnostic Hardware Specs: iPhone 16 Pro Max | OS Version: iOS 18.0.1 | Archive Source: Apple Support Community #256485242

    I am running into a persistent issue on my iPhone 16 Pro Max running iOS 18.0.1.
    Whenever the machine encounters Capacitive sensor threshold over-sensitivity in one-handed grip, the following diagnostic log appears in Console:

    CoreMotion: [CameraControl] Pressure register 0x6f1c registered threshold exceedance in portrait hold

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    iPad Air 13″ M2 (256GB) | Apple Pencil Pro | Seoul, South Korea
    WebKit / Safari Optimization Dev | "Verified Apple Discussions Archive"
    #72255
    Kullanıcı ProfiliDaniel Harris
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Tuning force pressure settings to Firmer and changing launch trigger from Single Click to Double Click.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Go to Settings > Accessibility > Camera Control. Change Pressure and Light Press Sensitivity to Firmer.
    2. In Settings > Camera > Camera Control, change Launch Camera to Double Click.
    3. Disable swipe gesture adjustments if exposure sliding is not required.

    Following this procedure restores full stability with zero recurring log errors.

    Mac Studio M3 Ultra (192GB) | Pro Display XDR 6K | Copenhagen, Denmark
    Apple Certified Support Professional (ACSP) | Mac Sysadmin & DevOps Engineer
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.