Skip to content
[Solved] Mac mini M4 Pro encountering Thunderbolt 4 SSD Speeds Throttled to USB 3.0 after update (macOS Sonoma 14.6.1)MappleCare Community ↗

[Solved] Mac mini M4 Pro encountering Thunderbolt 4 SSD Speeds Throttled to USB 3.0 after update (macOS Sonoma 14.6.1)

Started by Russell Howard • November 17, 2026 at 10:37 am • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] Mac mini M4 Pro encountering Thunderbolt 4 SSD Speeds Throttled to USB 3.0 after update (macOS Sonoma 14.6.1)

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #64631
    Kullanıcı ProfiliRussell Howard
    Community Contributor
    Diagnostic Hardware Specs: Mac mini M4 Pro | OS Version: macOS Sonoma 14.6.1 | Archive Source: Apple Support Community #256633153

    I am running into a persistent issue on my Mac mini M4 Pro running macOS Sonoma 14.6.1.
    Whenever the machine encounters Passive cable PCIe link negotiation falling back to USB 3.2 Gen 2, the following diagnostic log appears in Console:

    kernel: [IOThunderboltFamily] Port 1 PCIe tunnel timeout - falling back to xHCI 10Gbps bridge

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Mac Studio M3 Ultra (192GB) | Pro Display XDR 6K | Melbourne, VIC
    Senior macOS Reliability Eng | "Verified Apple Discussions Archive"
    #64632
    Kullanıcı ProfiliJustin Green
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Verifying certified 40Gbps active cables, resetting Thunderbolt kernel extensions, and enabling TRIM.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Verify cable has official Thunderbolt 4 lightning bolt and ‘4’ logo. Charging cables will not negotiate PCIe.
    2. Reset bus enumeration: sudo killall -9 diskarbitrationd.
    3. Enable APFS TRIM support: sudo trimforce enable.

    Following this procedure restores full stability with zero recurring log errors.

    Apple TV 4K (128GB Ethernet) | HomePod (2nd Gen Pair) | iPhone 16 Pro | Dublin, IE
    Apple Certified Support Professional (ACSP) | Smart Home & Matter/Thread Integrator
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.