Skip to content
[Solved] Mac mini M4 Pro External Display Flickering at High Refresh Rates (macOS Sequoia 15.1) – Verified TroubleshootingMappleCare Community ↗

[Solved] Mac mini M4 Pro External Display Flickering at High Refresh Rates (macOS Sequoia 15.1) – Verified Troubleshooting

Started by Ann Mendez • November 18, 2026 at 4:46 pm • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] Mac mini M4 Pro External Display Flickering at High Refresh Rates (macOS Sequoia 15.1) – Verified Troubleshooting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #93824
    Kullanıcı ProfiliAnn Mendez
    Community Contributor
    Diagnostic Hardware Specs: Mac mini M4 Pro | OS Version: macOS Sequoia 15.1 | Archive Source: Apple Support Community #256565637

    I am running into a persistent issue on my Mac mini M4 Pro running macOS Sequoia 15.1.
    Whenever the machine encounters DSC compression and VRR handshake failure over USB-C DisplayPort, the following diagnostic log appears in Console:

    WindowServer: [com.apple.WindowServer:server] Display 0x3dea link training failure / DSC buffer renegotiation

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 16″ M3 Max (48GB) | RME Babyface Pro FS | Genelec 8330A | Milan, IT
    Logic Pro Audio Producer & Mixing Engineer | "Verified Apple Discussions Archive"
    #93825
    Kullanıcı ProfiliJudith Brooks
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
    2. Reset display preferences:
      sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist
      rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
      killall -9 WindowServer
    3. In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Air 13″ M3 (16GB) | Apple GSX Terminal | Thermal Camera Seek Compact | Vienna, AT
    Apple Certified Support Professional (ACSP) | Apple Certified Service Technician (ACiT / ACSP)
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.