Skip to content
[Solved] Mac mini M4 Pro Thunderbolt 4 SSD Speeds Throttled to USB 3.0 (macOS Sequoia 15.1) – Verified TroubleshootingMappleCare Community ↗

[Solved] Mac mini M4 Pro Thunderbolt 4 SSD Speeds Throttled to USB 3.0 (macOS Sequoia 15.1) – Verified Troubleshooting

Started by Adam Ford • November 17, 2026 at 11:18 pm • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] Mac mini M4 Pro Thunderbolt 4 SSD Speeds Throttled to USB 3.0 (macOS Sequoia 15.1) – Verified Troubleshooting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #76679
    Kullanıcı ProfiliAdam Ford
    Community Contributor
    Diagnostic Hardware Specs: Mac mini M4 Pro | OS Version: macOS Sequoia 15.1 | Archive Source: Apple Support Community #256840088

    I am running into a persistent issue on my Mac mini M4 Pro running macOS Sequoia 15.1.
    Whenever the machine encounters Passive cable PCIe link negotiation falling back to USB 3.2 Gen 2, the following diagnostic log appears in Console:

    kernel: [IOThunderboltFamily] Port 1 PCIe tunnel timeout - falling back to xHCI 10Gbps bridge

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 14″ M4 Pro (48GB) | CalDigit TS4 | Tokyo, Japan
    Apple Certified Mac Technician | "Verified Apple Discussions Archive"
    #76680
    Kullanıcı ProfiliHugo Little
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Verifying certified 40Gbps active cables, resetting Thunderbolt kernel extensions, and enabling TRIM.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Verify cable has official Thunderbolt 4 lightning bolt and ‘4’ logo. Charging cables will not negotiate PCIe.
    2. Reset bus enumeration: sudo killall -9 diskarbitrationd.
    3. Enable APFS TRIM support: sudo trimforce enable.

    Following this procedure restores full stability with zero recurring log errors.

    Mac Studio M2 Max (64GB) | LG UltraFine 5K | New York, NY
    Apple Certified Support Professional (ACSP) | HomeKit / Matter IoT Integrator
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.