Skip to content
[Solved] Mac mini M4 Pro Thunderbolt 4 SSD Speeds Throttled to USB 3.0 (macOS Sequoia 15.1) – Verified TroubleshootingMappleCare Community ↗

[Solved] Mac mini M4 Pro Thunderbolt 4 SSD Speeds Throttled to USB 3.0 (macOS Sequoia 15.1) – Verified Troubleshooting

Started by Felix James • November 18, 2026 at 5:51 pm • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] Mac mini M4 Pro Thunderbolt 4 SSD Speeds Throttled to USB 3.0 (macOS Sequoia 15.1) – Verified Troubleshooting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #94890
    Kullanıcı ProfiliFelix James
    Community Contributor
    Diagnostic Hardware Specs: Mac mini M4 Pro | OS Version: macOS Sequoia 15.1 | Archive Source: Apple Support Community #256389008

    I am running into a persistent issue on my Mac mini M4 Pro running macOS Sequoia 15.1.
    Whenever the machine encounters Passive cable PCIe link negotiation falling back to USB 3.2 Gen 2, the following diagnostic log appears in Console:

    kernel: [IOThunderboltFamily] Port 1 PCIe tunnel timeout - falling back to xHCI 10Gbps bridge

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Apple Vision Pro (1TB) | Zeiss Optical Inserts | Sydney, NSW
    Mac Sysadmin & DevOps Engineer | "Verified Apple Discussions Archive"
    #94891
    Kullanıcı ProfiliCamille Underwood
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Verifying certified 40Gbps active cables, resetting Thunderbolt kernel extensions, and enabling TRIM.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Verify cable has official Thunderbolt 4 lightning bolt and ‘4’ logo. Charging cables will not negotiate PCIe.
    2. Reset bus enumeration: sudo killall -9 diskarbitrationd.
    3. Enable APFS TRIM support: sudo trimforce enable.

    Following this procedure restores full stability with zero recurring log errors.

    iPad Pro 13″ M4 (1TB, Nano-texture) | Magic Keyboard | San Francisco, CA
    Apple Certified Support Professional (ACSP) | Apple Silicon Architecture Lead
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.