Skip to content
[Solved] Mac Studio M1 Ultra Thunderbolt 4 SSD Speeds Throttled to USB 3.0 (macOS Sequoia 15.1) – Verified TroubleshootingMappleCare Community ↗

[Solved] Mac Studio M1 Ultra Thunderbolt 4 SSD Speeds Throttled to USB 3.0 (macOS Sequoia 15.1) – Verified Troubleshooting

Started by Justin Little • November 16, 2026 at 6:15 pm • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] Mac Studio M1 Ultra Thunderbolt 4 SSD Speeds Throttled to USB 3.0 (macOS Sequoia 15.1) – Verified Troubleshooting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #48058
    Kullanıcı ProfiliJustin Little
    Community Contributor
    Diagnostic Hardware Specs: Mac Studio M1 Ultra | OS Version: macOS Sequoia 15.1 | Archive Source: Apple Support Community #256112116

    I am running into a persistent issue on my Mac Studio M1 Ultra running macOS Sequoia 15.1.
    Whenever the machine encounters Passive cable PCIe link negotiation falling back to USB 3.2 Gen 2, the following diagnostic log appears in Console:

    kernel: [IOThunderboltFamily] Port 1 PCIe tunnel timeout - falling back to xHCI 10Gbps bridge

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    iPhone 15 Pro (256GB) | Apple Watch Series 10 | Brisbane, QLD
    Metal 3 Graphics Pipeline Dev | "Verified Apple Discussions Archive"
    #48059
    Kullanıcı ProfiliMelissa Russell
    Senior Specialist (Lvl 8)
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Verifying certified 40Gbps active cables, resetting Thunderbolt kernel extensions, and enabling TRIM.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Verify cable has official Thunderbolt 4 lightning bolt and ‘4’ logo. Charging cables will not negotiate PCIe.
    2. Reset bus enumeration: sudo killall -9 diskarbitrationd.
    3. Enable APFS TRIM support: sudo trimforce enable.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Air 15″ M3 (24GB) | LG UltraFine 5K | Apple Pencil Pro | Helsinki, FI
    Apple Certified Support Professional (ACSP) | Product Designer & Design Systems Lead
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.