Skip to content
[Solved] Mac Studio M1 Ultra Thunderbolt 4 SSD Speeds Throttled to USB 3.0 (macOS Sonoma 14.6.1) – Verified TroubleshootingMappleCare Community ↗

[Solved] Mac Studio M1 Ultra Thunderbolt 4 SSD Speeds Throttled to USB 3.0 (macOS Sonoma 14.6.1) – Verified Troubleshooting

Started by Curtis Stewart • November 17, 2026 at 4:26 pm • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] Mac Studio M1 Ultra Thunderbolt 4 SSD Speeds Throttled to USB 3.0 (macOS Sonoma 14.6.1) – Verified Troubleshooting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #69887
    Kullanıcı ProfiliCurtis Stewart
    Community Contributor
    Diagnostic Hardware Specs: Mac Studio M1 Ultra | OS Version: macOS Sonoma 14.6.1 | Archive Source: Apple Support Community #256070927

    I am running into a persistent issue on my Mac Studio M1 Ultra running macOS Sonoma 14.6.1.
    Whenever the machine encounters Passive cable PCIe link negotiation falling back to USB 3.2 Gen 2, the following diagnostic log appears in Console:

    kernel: [IOThunderboltFamily] Port 1 PCIe tunnel timeout - falling back to xHCI 10Gbps bridge

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 14″ M4 Pro (48GB) | CalDigit TS4 | Brisbane, QLD
    WebKit / Safari Optimization Dev | "Verified Apple Discussions Archive"
    #69888
    Kullanıcı ProfiliHarry Price
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Verifying certified 40Gbps active cables, resetting Thunderbolt kernel extensions, and enabling TRIM.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Verify cable has official Thunderbolt 4 lightning bolt and ‘4’ logo. Charging cables will not negotiate PCIe.
    2. Reset bus enumeration: sudo killall -9 diskarbitrationd.
    3. Enable APFS TRIM support: sudo trimforce enable.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Pro 14″ M3 Max (36GB) | BenQ SW321C 4K | Denver, CO
    Apple Certified Support Professional (ACSP) | Final Cut Pro 8K Colorist
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.