Skip to content
[Solved] Mac Studio M1 Ultra Thunderbolt 4 SSD Speeds Throttled to USB 3.0 (macOS Sonoma 14.6.1) – Verified TroubleshootingMappleCare Community ↗

[Solved] Mac Studio M1 Ultra Thunderbolt 4 SSD Speeds Throttled to USB 3.0 (macOS Sonoma 14.6.1) – Verified Troubleshooting

Started by Jun Carter • November 18, 2026 at 6:23 pm • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] Mac Studio M1 Ultra Thunderbolt 4 SSD Speeds Throttled to USB 3.0 (macOS Sonoma 14.6.1) – Verified Troubleshooting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #95381
    Kullanıcı ProfiliJun Carter
    Community Contributor
    Diagnostic Hardware Specs: Mac Studio M1 Ultra | OS Version: macOS Sonoma 14.6.1 | Archive Source: Apple Support Community #256546388

    I am running into a persistent issue on my Mac Studio M1 Ultra running macOS Sonoma 14.6.1.
    Whenever the machine encounters Passive cable PCIe link negotiation falling back to USB 3.2 Gen 2, the following diagnostic log appears in Console:

    kernel: [IOThunderboltFamily] Port 1 PCIe tunnel timeout - falling back to xHCI 10Gbps bridge

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Air 13″ M2 (16GB) | Magic Trackpad 2 | Vancouver, BC
    SwiftUI & VisionOS Specialist | "Verified Apple Discussions Archive"
    #95382
    Kullanıcı ProfiliDaisuke Lewis
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Verifying certified 40Gbps active cables, resetting Thunderbolt kernel extensions, and enabling TRIM.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Verify cable has official Thunderbolt 4 lightning bolt and ‘4’ logo. Charging cables will not negotiate PCIe.
    2. Reset bus enumeration: sudo killall -9 diskarbitrationd.
    3. Enable APFS TRIM support: sudo trimforce enable.

    Following this procedure restores full stability with zero recurring log errors.

    iPad Air 13″ M2 (256GB) | Apple Pencil Pro | Zurich, Switzerland
    Apple Certified Support Professional (ACSP) | Senior iOS / Swift Developer
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.