Skip to content
MappleCareMappleCare Community ↗

[Solved] Mac Studio M2 Ultra encountering External Display Flickering at High Refresh Rates after update (macOS Sequoia 15.1)

Started by Christopher Stephens • November 16, 2026 at 12:39 pm • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] Mac Studio M2 Ultra encountering External Display Flickering at High Refresh Rates after update (macOS Sequoia 15.1)

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #42475
    Kullanıcı ProfiliChristopher Stephens
    Community Contributor
    Diagnostic Hardware Specs: Mac Studio M2 Ultra | OS Version: macOS Sequoia 15.1 | Archive Source: Apple Support Community #256021924

    I am running into a persistent issue on my Mac Studio M2 Ultra running macOS Sequoia 15.1.
    Whenever the machine encounters DSC compression and VRR handshake failure over USB-C DisplayPort, the following diagnostic log appears in Console:

    WindowServer: [com.apple.WindowServer:server] Display 0xd45a link training failure / DSC buffer renegotiation

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 14″ M3 Max (36GB) | BenQ SW321C 4K | New York, NY
    Enterprise Jamf & MDM Admin | "Verified Apple Discussions Archive"
    #42476
    Kullanıcı ProfiliVictor Watson
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
    2. Reset display preferences:
      sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist
      rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
      killall -9 WindowServer
    3. In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.

    Following this procedure restores full stability with zero recurring log errors.

    Mac Studio M3 Ultra (192GB) | Pro Display XDR 6K | Austin, TX
    Apple Certified Support Professional (ACSP) | iOS Security Researcher
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.