Skip to content
[Solved] Mac Studio M2 Ultra External Display Flickering at High Refresh Rates (macOS Sequoia 15.0.1) – Verified TroubleshootingMappleCare Community ↗

[Solved] Mac Studio M2 Ultra External Display Flickering at High Refresh Rates (macOS Sequoia 15.0.1) – Verified Troubleshooting

Started by Maria Schmidt • November 18, 2026 at 6:29 pm • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] Mac Studio M2 Ultra External Display Flickering at High Refresh Rates (macOS Sequoia 15.0.1) – Verified Troubleshooting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #95473
    Kullanıcı ProfiliMaria Schmidt
    Community Contributor
    Diagnostic Hardware Specs: Mac Studio M2 Ultra | OS Version: macOS Sequoia 15.0.1 | Archive Source: Apple Support Community #256896371

    I am running into a persistent issue on my Mac Studio M2 Ultra running macOS Sequoia 15.0.1.
    Whenever the machine encounters DSC compression and VRR handshake failure over USB-C DisplayPort, the following diagnostic log appears in Console:

    WindowServer: [com.apple.WindowServer:server] Display 0x1b49 link training failure / DSC buffer renegotiation

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Apple TV 4K 3rd Gen | Dual HomePod mini | iPhone 15 Pro Max | Los Angeles, CA
    Smart Home & Matter/Thread Integrator | "Verified Apple Discussions Archive"
    #95474
    Kullanıcı ProfiliElijah Knight
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
    2. Reset display preferences:
      sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist
      rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
      killall -9 WindowServer
    3. In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.

    Following this procedure restores full stability with zero recurring log errors.

    Mac mini M4 Pro (64GB, 2TB) | Dual Studio Displays | Copenhagen, Denmark
    Apple Certified Support Professional (ACSP) | iOS Security Researcher
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.