Skip to content
[Solved] Mac Studio M2 Ultra External Display Flickering at High Refresh Rates (macOS Sequoia 15.1) – Verified TroubleshootingMappleCare Community ↗

[Solved] Mac Studio M2 Ultra External Display Flickering at High Refresh Rates (macOS Sequoia 15.1) – Verified Troubleshooting

Started by Jeremy Dean • November 17, 2026 at 12:36 am • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] Mac Studio M2 Ultra External Display Flickering at High Refresh Rates (macOS Sequoia 15.1) – Verified Troubleshooting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #54599
    Kullanıcı ProfiliJeremy Dean
    Community Contributor
    Diagnostic Hardware Specs: Mac Studio M2 Ultra | OS Version: macOS Sequoia 15.1 | Archive Source: Apple Support Community #256464731

    I am running into a persistent issue on my Mac Studio M2 Ultra running macOS Sequoia 15.1.
    Whenever the machine encounters DSC compression and VRR handshake failure over USB-C DisplayPort, the following diagnostic log appears in Console:

    WindowServer: [com.apple.WindowServer:server] Display 0xb92e link training failure / DSC buffer renegotiation

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Mac Studio M2 Max (64GB) | LG UltraFine 5K | Tokyo, Japan
    HomeKit / Matter IoT Integrator | "Verified Apple Discussions Archive"
    #54600
    Kullanıcı ProfiliSean Kaiser
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
    2. Reset display preferences:
      sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist
      rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
      killall -9 WindowServer
    3. In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.

    Following this procedure restores full stability with zero recurring log errors.

    Mac Pro M2 Ultra | Dual Pro Display XDR | Blackmagic UltraStudio 4K Mini | Boston, MA
    Apple Certified Support Professional (ACSP) | Final Cut Pro / DaVinci Colorist & Editor
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.