MappleCare Community
[Solved] Mac Virtual Display Ultra-Wide Mode Connection Dropping on Apple Vision Pro 512GB + MacBook Pro 16″ M3 Max: How to resolve AWDL (Apple Wireless Direct Link) 5GHz channel interference and peer packet drop
Find answers from other Apple users or start a discussion about your device.
Home › Forums › Apple Vision Pro & visionOS › [Solved] Mac Virtual Display Ultra-Wide Mode Connection Dropping on Apple Vision Pro 512GB + MacBook Pro 16″ M3 Max: How to resolve AWDL (Apple Wireless Direct Link) 5GHz channel interference and peer packet drop
- This topic has 1 reply, 2 voices, and was last updated 1 hour, 41 minutes ago by
Roger Herrera.
-
AuthorPosts
-
November 14, 2026 at 11:07 pm #14177
Christopher Jones
Community ContributorDiagnostic Hardware Specs: Apple Vision Pro 512GB + MacBook Pro 16″ M3 Max | OS Version: visionOS 2.0 + macOS Sequoia 15.0.1 | Archive Source: Apple Support Community #256060278I am running into a persistent issue on my Apple Vision Pro 512GB + MacBook Pro 16″ M3 Max running visionOS 2.0 + macOS Sequoia 15.0.1.
Whenever the machine encounters AWDL (Apple Wireless Direct Link) 5GHz channel interference and peer packet drop, the following diagnostic log appears in Console:SpatialSharing: [com.apple.airplay.virtualdisplay] AWDL peer link drop - retry timeout exceeded on interface awdl0I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?
Mac Studio M2 Ultra (128GB) | ASUS ProArt PA32UCG-K | OWC ThunderBay 8 | Paris, FRFinal Cut Pro / DaVinci Colorist & Editor | "Verified Apple Discussions Archive"November 14, 2026 at 11:07 pm #14178Roger Herrera
Lead ModeratorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Locking Wi-Fi to a dedicated 5GHz/6GHz SSID, toggling AirPlay Receiver, and renewing Handoff tokens.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Ensure both Mac and Vision Pro are connected to the exact same 5GHz/6GHz Wi-Fi band without band-steering.
- On Mac, open System Settings > General > AirPlay & Continuity and toggle AirPlay Receiver off and on.
- In visionOS Control Center, bring Mac Virtual Display window within 2 meters, select Connect, and set resolution to Ultra-Wide (4K equivalent).
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 14″ M4 (32GB) | Studio Display | YubiKey 5C NFC | Seattle, WAApple Certified Support Professional (ACSP) | Enterprise Mac Sysadmin & Jamf Pro Architect -
AuthorPosts
- You must be logged in to reply to this topic.