Skip to content
MappleCare Community ↗

[Solved] Mac Virtual Display Ultra-Wide Mode Connection Dropping on visionOS 2.0 + macOS Sequoia 15.0.1: Diagnostic steps and permanent fix

Started by Aria Moreno • November 15, 2026 at 9:53 pm • 1 Community Replies • 2 Participants

Home › Forums › Apple Vision Pro & visionOS › [Solved] Mac Virtual Display Ultra-Wide Mode Connection Dropping on visionOS 2.0 + macOS Sequoia 15.0.1: Diagnostic steps and permanent fix

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #34230
    Aria Moreno
    Community Contributor
    Diagnostic Hardware Specs: Apple Vision Pro 1TB + Mac Studio M2 Ultra | OS Version: visionOS 2.0 + macOS Sequoia 15.0.1 | Archive Source: Apple Support Community #256610155

    I am running into a persistent issue on my Apple Vision Pro 1TB + Mac Studio M2 Ultra running visionOS 2.0 + macOS Sequoia 15.0.1.
    Whenever the machine encounters AWDL (Apple Wireless Direct Link) 5GHz channel interference and peer packet drop, the following diagnostic log appears in Console:

    SpatialSharing: [com.apple.airplay.virtualdisplay] AWDL peer link drop - retry timeout exceeded on interface awdl0

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    iMac 24″ M3 (16GB) | AST 2 Diagnostic Station | ESD Workstation | Zurich, CH
    Apple Certified Service Technician (ACiT / ACSP) | "Verified Apple Discussions Archive"
    #34231
    Nathaniel Johnston
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking Wi-Fi to a dedicated 5GHz/6GHz SSID, toggling AirPlay Receiver, and renewing Handoff tokens.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Ensure both Mac and Vision Pro are connected to the exact same 5GHz/6GHz Wi-Fi band without band-steering.
    2. On Mac, open System Settings > General > AirPlay & Continuity and toggle AirPlay Receiver off and on.
    3. In visionOS Control Center, bring Mac Virtual Display window within 2 meters, select Connect, and set resolution to Ultra-Wide (4K equivalent).

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Pro 16″ M1 Max (64GB, Workhorse) | Dell U3224KB | Paris, France
    Apple Certified Support Professional (ACSP) | Logic Pro DSP & Mixing Engineer
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.