Skip to content
MappleCare Community ↗

[Solved] MacBook Pro 16″ M1 Pro MagSafe 3 Blinking Amber LED and Refusing to Charge (macOS Sonoma 14.6) – Verified Troubleshooting

Started by Seth Henderson • November 15, 2026 at 6:25 pm • 1 Community Replies • 2 Participants

Home › Forums › Battery, Charging & Thermal Care › [Solved] MacBook Pro 16″ M1 Pro MagSafe 3 Blinking Amber LED and Refusing to Charge (macOS Sonoma 14.6) – Verified Troubleshooting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #31659
    Seth Henderson
    Community Contributor
    Diagnostic Hardware Specs: MacBook Pro 16″ M1 Pro | OS Version: macOS Sonoma 14.6 | Archive Source: Apple Support Community #256037542

    I am running into a persistent issue on my MacBook Pro 16″ M1 Pro running macOS Sonoma 14.6.
    Whenever the machine encounters SMC Power Delivery controller handshake fault, the following diagnostic log appears in Console:

    AppleSmartBattery: [Power] MagSafe 3 EPR 28V/5A handshake negotiation rejected: resistance anomaly

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 16″ M4 Max (128GB) | Studio Display 5K | Edinburgh, UK
    Final Cut Pro 8K Colorist | "Verified Apple Discussions Archive"
    #31660
    Joshua Barnes
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
    2. Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
    3. Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Pro 16″ M3 Max (64GB) | Tether Tools Pro | SanDisk Extreme Pro 4TB | Vancouver, BC
    Apple Certified Support Professional (ACSP) | Commercial Photographer & Digitech
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.