Skip to content
[Solved] MacBook Pro 16″ M1 Pro MagSafe 3 Blinking Amber LED and Refusing to Charge (macOS Sonoma 14.6) – Verified TroubleshootingMappleCare Community ↗

[Solved] MacBook Pro 16″ M1 Pro MagSafe 3 Blinking Amber LED and Refusing to Charge (macOS Sonoma 14.6) – Verified Troubleshooting

Started by Gary Douglas • November 17, 2026 at 6:53 pm • 1 Community Replies • 2 Participants

Home › Forums › Battery, Charging & Thermal Care › [Solved] MacBook Pro 16″ M1 Pro MagSafe 3 Blinking Amber LED and Refusing to Charge (macOS Sonoma 14.6) – Verified Troubleshooting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #72380
    Kullanıcı ProfiliGary Douglas
    Community Contributor
    Diagnostic Hardware Specs: MacBook Pro 16″ M1 Pro | OS Version: macOS Sonoma 14.6 | Archive Source: Apple Support Community #256611499

    I am running into a persistent issue on my MacBook Pro 16″ M1 Pro running macOS Sonoma 14.6.
    Whenever the machine encounters SMC Power Delivery controller handshake fault, the following diagnostic log appears in Console:

    AppleSmartBattery: [Power] MagSafe 3 EPR 28V/5A handshake negotiation rejected: resistance anomaly

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Air 13″ M2 (16GB) | Magic Trackpad 2 | Oslo, Norway
    Senior macOS Reliability Eng | "Verified Apple Discussions Archive"
    #72381
    Kullanıcı ProfiliJustin Burns
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
    2. Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
    3. Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.

    Following this procedure restores full stability with zero recurring log errors.

    Mac mini M2 Pro (32GB) | Apple Magic Keyboard Touch ID | Boston, MA
    Apple Certified Support Professional (ACSP) | Creative Pro Video Editor
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.