Skip to content
MappleCareMappleCare Community ↗

[Solved] MacBook Pro 16″ M3 Max encountering MagSafe 3 Blinking Amber LED and Refusing to Charge after update (macOS Sonoma 14.6)

Started by Zachary Tucker • November 16, 2026 at 12:48 pm • 1 Community Replies • 2 Participants

Home › Forums › Battery, Charging & Thermal Care › [Solved] MacBook Pro 16″ M3 Max encountering MagSafe 3 Blinking Amber LED and Refusing to Charge after update (macOS Sonoma 14.6)

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #42615
    Kullanıcı ProfiliZachary Tucker
    Community Contributor
    Diagnostic Hardware Specs: MacBook Pro 16″ M3 Max | OS Version: macOS Sonoma 14.6 | Archive Source: Apple Support Community #256714978

    I am running into a persistent issue on my MacBook Pro 16″ M3 Max running macOS Sonoma 14.6.
    Whenever the machine encounters SMC Power Delivery controller handshake fault, the following diagnostic log appears in Console:

    AppleSmartBattery: [Power] MagSafe 3 EPR 28V/5A handshake negotiation rejected: resistance anomaly

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Mac Studio M2 Max (32GB) | Dual LG UltraFine 5K | iPhone 16 Pro Max | Hamburg, DE
    iOS / Swift Engineer | "Verified Apple Discussions Archive"
    #42616
    Kullanıcı ProfiliEdward Reid
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
    2. Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
    3. Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.

    Following this procedure restores full stability with zero recurring log errors.

    iPhone 15 Pro (256GB) | Apple Watch Series 10 | Montreal, QC
    Apple Certified Support Professional (ACSP) | CoreML & On-Device AI Researcher
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.