Skip to content
[Solved] MacBook Pro 16″ M3 Max Final Cut Pro ProRes 422 HQ Export Hanging at 68% (macOS Sequoia 15.1 + Final Cut Pro 11.0) – Verified TroubleshootingMappleCare Community ↗

[Solved] MacBook Pro 16″ M3 Max Final Cut Pro ProRes 422 HQ Export Hanging at 68% (macOS Sequoia 15.1 + Final Cut Pro 11.0) – Verified Troubleshooting

Started by Wayne Coleman • November 17, 2026 at 7:10 pm • 1 Community Replies • 2 Participants

Home › Forums › Logic Pro, Final Cut Pro & Pro Apps › [Solved] MacBook Pro 16″ M3 Max Final Cut Pro ProRes 422 HQ Export Hanging at 68% (macOS Sequoia 15.1 + Final Cut Pro 11.0) – Verified Troubleshooting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #72672
    Kullanıcı ProfiliWayne Coleman
    Community Contributor
    Diagnostic Hardware Specs: MacBook Pro 16″ M3 Max | OS Version: macOS Sequoia 15.1 + Final Cut Pro 11.0 | Archive Source: Apple Support Community #256485160

    I am running into a persistent issue on my MacBook Pro 16″ M3 Max running macOS Sequoia 15.1 + Final Cut Pro 11.0.
    Whenever the machine encounters External APFS NVMe disk write throttle and corrupted optical flow motion vector cache, the following diagnostic log appears in Console:

    Final Cut Pro: [RenderEngine] OpticalFlow optical motion frame render timeout at frame 0x63ff

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Apple TV 4K 3rd Gen | Dual HomePod mini | iPhone 15 Pro Max | Manchester, UK
    Smart Home & Matter/Thread Integrator | "Verified Apple Discussions Archive"
    #72673
    Kullanıcı ProfiliCynthia Lane
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Purging generated project render files and disabling Optical Flow on speed-ramped clips.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In Final Cut Pro, select your Project in the browser, go to File > Delete Generated Project Files, and select Delete Render Files (All).
    2. Select any re-timed/speed-ramped clips, open the Video Inspector, and change Video Quality from Optical Flow to Frame Blending.
    3. Export destination should be an internal APFS location first before transferring to external storage.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Pro 14″ M3 Max (36GB) | BenQ SW321C 4K | Cupertino, CA
    Apple Certified Support Professional (ACSP) | HomeKit / Matter IoT Integrator
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.