Skip to content
MappleCareMappleCare Community ↗

[Solved] MacBook Pro 16″ M3 Pro encountering External Display Flickering at High Refresh Rates after update (macOS Sequoia 15.1)

Started by Siddharth Nicholson • November 16, 2026 at 12:20 pm • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] MacBook Pro 16″ M3 Pro encountering External Display Flickering at High Refresh Rates after update (macOS Sequoia 15.1)

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #42177
    Kullanıcı ProfiliSiddharth Nicholson
    Community Contributor
    Diagnostic Hardware Specs: MacBook Pro 16″ M3 Pro | OS Version: macOS Sequoia 15.1 | Archive Source: Apple Support Community #256019383

    I am running into a persistent issue on my MacBook Pro 16″ M3 Pro running macOS Sequoia 15.1.
    Whenever the machine encounters DSC compression and VRR handshake failure over USB-C DisplayPort, the following diagnostic log appears in Console:

    WindowServer: [com.apple.WindowServer:server] Display 0x30dc link training failure / DSC buffer renegotiation

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    iPad Air 13″ M2 (256GB) | Apple Pencil Pro | Vancouver, BC
    Mac Sysadmin & DevOps Engineer | "Verified Apple Discussions Archive"
    #42178
    Kullanıcı ProfiliJoseph Jones
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
    2. Reset display preferences:
      sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist
      rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
      killall -9 WindowServer
    3. In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Air 13″ M3 (16GB) | iPhone 16 Pro (512GB) | AirPods Pro 2 | Belfast, UK
    Apple Certified Support Professional (ACSP) | Digital Nomad & Travel Filmmaker
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.