Skip to content
[Solved] MacBook Pro 16″ M3 Pro External Display Flickering at High Refresh Rates (macOS Sequoia 15.0.1) – Verified TroubleshootingMappleCare Community ↗

[Solved] MacBook Pro 16″ M3 Pro External Display Flickering at High Refresh Rates (macOS Sequoia 15.0.1) – Verified Troubleshooting

Started by Nathaniel Carr • November 19, 2026 at 2:50 pm • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] MacBook Pro 16″ M3 Pro External Display Flickering at High Refresh Rates (macOS Sequoia 15.0.1) – Verified Troubleshooting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #113542
    Kullanıcı ProfiliNathaniel Carr
    Community Contributor
    Diagnostic Hardware Specs: MacBook Pro 16″ M3 Pro | OS Version: macOS Sequoia 15.0.1 | Archive Source: Apple Support Community #256069964

    I am running into a persistent issue on my MacBook Pro 16″ M3 Pro running macOS Sequoia 15.0.1.
    Whenever the machine encounters DSC compression and VRR handshake failure over USB-C DisplayPort, the following diagnostic log appears in Console:

    WindowServer: [com.apple.WindowServer:server] Display 0x6fae link training failure / DSC buffer renegotiation

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 16″ M4 Max (128GB) | Studio Display 5K | Copenhagen, Denmark
    Creative Pro Video Editor | "Verified Apple Discussions Archive"
    #113543
    Kullanıcı ProfiliJack Montgomery
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
    2. Reset display preferences:
      sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist
      rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
      killall -9 WindowServer
    3. In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Pro 16″ M4 Max (128GB) | Studio Display 5K | Dublin, Ireland
    Apple Certified Support Professional (ACSP) | macOS Kernel & Driver Engineer
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.