Skip to content
[Solved] MacBook Pro 16″ M3 Pro External Display Flickering at High Refresh Rates (macOS Sonoma 14.7) – Verified TroubleshootingMappleCare Community ↗

[Solved] MacBook Pro 16″ M3 Pro External Display Flickering at High Refresh Rates (macOS Sonoma 14.7) – Verified Troubleshooting

Started by Shirley Romero • November 16, 2026 at 6:39 pm • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] MacBook Pro 16″ M3 Pro External Display Flickering at High Refresh Rates (macOS Sonoma 14.7) – Verified Troubleshooting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #48471
    Kullanıcı ProfiliShirley Romero
    Community Contributor
    Diagnostic Hardware Specs: MacBook Pro 16″ M3 Pro | OS Version: macOS Sonoma 14.7 | Archive Source: Apple Support Community #256477664

    I am running into a persistent issue on my MacBook Pro 16″ M3 Pro running macOS Sonoma 14.7.
    Whenever the machine encounters DSC compression and VRR handshake failure over USB-C DisplayPort, the following diagnostic log appears in Console:

    WindowServer: [com.apple.WindowServer:server] Display 0x1d29 link training failure / DSC buffer renegotiation

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 14″ M3 Pro (36GB) | Focusrite Clarett+ 8Pre | Beyerdynamic DT 1990 | Ottawa, ON
    Logic Pro Audio Producer & Mixing Engineer | "Verified Apple Discussions Archive"
    #48472
    Kullanıcı ProfiliLaura Johnson
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
    2. Reset display preferences:
      sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist
      rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
      killall -9 WindowServer
    3. In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.

    Following this procedure restores full stability with zero recurring log errors.

    Mac Studio M2 Ultra (192GB) | Universal Audio Apollo x8p | Logic Pro 11 | Zurich, CH
    Apple Certified Support Professional (ACSP) | Logic Pro Audio Producer & Mixing Engineer
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.