Skip to content
[Solved] MagSafe 3 Blinking Amber LED and Refusing to Charge on MacBook Pro 16″ M3 Max: How to resolve SMC Power Delivery controller handshake faultMappleCare Community ↗

[Solved] MagSafe 3 Blinking Amber LED and Refusing to Charge on MacBook Pro 16″ M3 Max: How to resolve SMC Power Delivery controller handshake fault

Started by Steven Bauer • November 17, 2026 at 10:22 am • 1 Community Replies • 2 Participants

Home › Forums › Battery, Charging & Thermal Care › [Solved] MagSafe 3 Blinking Amber LED and Refusing to Charge on MacBook Pro 16″ M3 Max: How to resolve SMC Power Delivery controller handshake fault

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #64381
    Kullanıcı ProfiliSteven Bauer
    Community Contributor
    Diagnostic Hardware Specs: MacBook Pro 16″ M3 Max | OS Version: macOS Sequoia 15.1 | Archive Source: Apple Support Community #256792852

    I am running into a persistent issue on my MacBook Pro 16″ M3 Max running macOS Sequoia 15.1.
    Whenever the machine encounters SMC Power Delivery controller handshake fault, the following diagnostic log appears in Console:

    AppleSmartBattery: [Power] MagSafe 3 EPR 28V/5A handshake negotiation rejected: resistance anomaly

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Apple Vision Pro (512GB) | MacBook Pro 16″ M3 Max | Magic Trackpad | Singapore
    visionOS Spatial Computing Developer | "Verified Apple Discussions Archive"
    #64382
    Kullanıcı ProfiliJerry Gonzales
    Certified Tech (Lvl 5)
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
    2. Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
    3. Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Pro 14″ M4 (32GB) | Studio Display | YubiKey 5C NFC | Brussels, BE
    Apple Certified Support Professional (ACSP) | Enterprise Mac Sysadmin & Jamf Pro Architect
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.