Skip to content
MappleCareMappleCare Community ↗

[Solved] MagSafe 3 Blinking Amber LED and Refusing to Charge on macOS Sonoma 14.6: Diagnostic steps and permanent fix

Started by Bruce Vasquez • November 16, 2026 at 11:49 am • 1 Community Replies • 2 Participants

Home › Forums › Battery, Charging & Thermal Care › [Solved] MagSafe 3 Blinking Amber LED and Refusing to Charge on macOS Sonoma 14.6: Diagnostic steps and permanent fix

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #41732
    Kullanıcı ProfiliBruce Vasquez
    Certified Tech (Lvl 5)
    Diagnostic Hardware Specs: MacBook Pro 14″ M2 Pro | OS Version: macOS Sonoma 14.6 | Archive Source: Apple Support Community #256215377

    I am running into a persistent issue on my MacBook Pro 14″ M2 Pro running macOS Sonoma 14.6.
    Whenever the machine encounters SMC Power Delivery controller handshake fault, the following diagnostic log appears in Console:

    AppleSmartBattery: [Power] MagSafe 3 EPR 28V/5A handshake negotiation rejected: resistance anomaly

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Mac mini M4 (16GB) Home Server | Apple TV 4K | Eve Energy Thread Mesh | Portland, OR
    Smart Home & Matter/Thread Integrator | "Verified Apple Discussions Archive"
    #41733
    Kullanıcı ProfiliLiam Klein
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
    2. Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
    3. Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Pro 14″ M3 Pro (36GB) | OWC Envoy Pro FX | iPad Pro 13″ M4 | Tokyo, JP
    Apple Certified Support Professional (ACSP) | Commercial Photographer & Digitech
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.