Skip to content
MappleCare Community ↗

[Solved] Matter Accessory Showing ‘No Response’ in Apple Home App on Apple TV 4K: How to resolve IPv6 mDNS Multicast DNS routing failure between 2.4GHz Wi-Fi and Thread Border Router

Started by Carol Silva • November 15, 2026 at 9:53 am • 1 Community Replies • 2 Participants

Home › Forums › HomeKit, Apple TV & Smart Home › [Solved] Matter Accessory Showing ‘No Response’ in Apple Home App on Apple TV 4K: How to resolve IPv6 mDNS Multicast DNS routing failure between 2.4GHz Wi-Fi and Thread Border Router

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #24508
    Carol Silva
    Community Contributor
    Diagnostic Hardware Specs: Apple TV 4K (3rd Gen) 128GB Wi-Fi + Ethernet | OS Version: HomePod OS 18.1 | Archive Source: Apple Support Community #256698683

    I am running into a persistent issue on my Apple TV 4K (3rd Gen) 128GB Wi-Fi + Ethernet running HomePod OS 18.1.
    Whenever the machine encounters IPv6 mDNS Multicast DNS routing failure between 2.4GHz Wi-Fi and Thread Border Router, the following diagnostic log appears in Console:

    homed: [Matter] Transport connection dropped for NodeID 0x1230: IPv6 unreachable via Thread mesh

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Mac Studio M1 Max (32GB) | Dual Dell UltraSharp 4K | Logitech MX Master 3S | Toronto, ON
    Product Designer & Design Systems Lead | "Verified Apple Discussions Archive"
    #24509
    Sebastian Burns
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Enabling IGMP snooping / multicast forwarding and rebooting primary Thread Border Router.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In home router Wi-Fi settings, enable IGMP Snooping and disable ‘AP Isolation’.
    2. Power cycle your primary Thread Border Router (Apple TV 4K connected via Gigabit Ethernet).
    3. Power-cycle the unresponsive Matter accessory for 10 seconds to prompt a fresh Thread mesh re-route.

    Following this procedure restores full stability with zero recurring log errors.

    Mac mini M4 (16GB) Home Server | Apple TV 4K | Eve Energy Thread Mesh | San Diego, CA
    Apple Certified Support Professional (ACSP) | Smart Home & Matter/Thread Integrator
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.