Skip to content
[Solved] Matter Accessory Showing ‘No Response’ in Apple Home App on tvOS 18.0: Diagnostic steps and permanent fixMappleCare Community ↗

[Solved] Matter Accessory Showing ‘No Response’ in Apple Home App on tvOS 18.0: Diagnostic steps and permanent fix

Started by Gregory Moreno • November 17, 2026 at 11:39 am • 1 Community Replies • 2 Participants

Home › Forums › HomeKit, Apple TV & Smart Home › [Solved] Matter Accessory Showing ‘No Response’ in Apple Home App on tvOS 18.0: Diagnostic steps and permanent fix

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #65653
    Kullanıcı ProfiliGregory Moreno
    Community Contributor
    Diagnostic Hardware Specs: Apple TV 4K (3rd Gen) 128GB Wi-Fi + Ethernet | OS Version: tvOS 18.0 | Archive Source: Apple Support Community #256230123

    I am running into a persistent issue on my Apple TV 4K (3rd Gen) 128GB Wi-Fi + Ethernet running tvOS 18.0.
    Whenever the machine encounters IPv6 mDNS Multicast DNS routing failure between 2.4GHz Wi-Fi and Thread Border Router, the following diagnostic log appears in Console:

    homed: [Matter] Transport connection dropped for NodeID 0x97e2: IPv6 unreachable via Thread mesh

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Mac Studio M2 Ultra (128GB) | ASUS ProArt PA32UCG-K | OWC ThunderBay 8 | Milan, IT
    Final Cut Pro / DaVinci Colorist & Editor | "Verified Apple Discussions Archive"
    #65654
    Kullanıcı ProfiliRichard Henry
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Enabling IGMP snooping / multicast forwarding and rebooting primary Thread Border Router.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In home router Wi-Fi settings, enable IGMP Snooping and disable ‘AP Isolation’.
    2. Power cycle your primary Thread Border Router (Apple TV 4K connected via Gigabit Ethernet).
    3. Power-cycle the unresponsive Matter accessory for 10 seconds to prompt a fresh Thread mesh re-route.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Air 15″ M3 (24GB) | CalDigit SOHO | Zurich, Switzerland
    Apple Certified Support Professional (ACSP) | Senior macOS Reliability Eng
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.