Skip to content
[Solved] Thunderbolt 4 SSD Speeds Throttled to USB 3.0 on macOS Sequoia 15.1: Diagnostic steps and permanent fixMappleCare Community ↗

[Solved] Thunderbolt 4 SSD Speeds Throttled to USB 3.0 on macOS Sequoia 15.1: Diagnostic steps and permanent fix

Started by Roman Sutherland • November 17, 2026 at 3:56 pm • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] Thunderbolt 4 SSD Speeds Throttled to USB 3.0 on macOS Sequoia 15.1: Diagnostic steps and permanent fix

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #69389
    Kullanıcı ProfiliRoman Sutherland
    Community Contributor
    Diagnostic Hardware Specs: Mac Studio M1 Ultra | OS Version: macOS Sequoia 15.1 | Archive Source: Apple Support Community #256199360

    I am running into a persistent issue on my Mac Studio M1 Ultra running macOS Sequoia 15.1.
    Whenever the machine encounters Passive cable PCIe link negotiation falling back to USB 3.2 Gen 2, the following diagnostic log appears in Console:

    kernel: [IOThunderboltFamily] Port 1 PCIe tunnel timeout - falling back to xHCI 10Gbps bridge

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    iPhone 16 Pro (512GB) | AirPods Pro 2 (USB-C) | Lyon, France
    Apple Silicon Architecture Lead | "Verified Apple Discussions Archive"
    #69390
    Kullanıcı ProfiliPenelope Mitchell
    Senior Specialist (Lvl 8)
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Verifying certified 40Gbps active cables, resetting Thunderbolt kernel extensions, and enabling TRIM.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Verify cable has official Thunderbolt 4 lightning bolt and ‘4’ logo. Charging cables will not negotiate PCIe.
    2. Reset bus enumeration: sudo killall -9 diskarbitrationd.
    3. Enable APFS TRIM support: sudo trimforce enable.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Pro 16″ M3 Max (128GB) | iPad Pro 11″ M4 (Apple Pencil Pro) | Salt Lake City, UT
    Apple Certified Support Professional (ACSP) | Computer Science & Machine Learning Student
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.