Skip to content
[Solved] Thunderbolt 4 SSD Speeds Throttled to USB 3.0 on macOS Sequoia 15.1: Diagnostic steps and permanent fixMappleCare Community ↗

[Solved] Thunderbolt 4 SSD Speeds Throttled to USB 3.0 on macOS Sequoia 15.1: Diagnostic steps and permanent fix

Started by Clara Hayes • November 18, 2026 at 8:45 am • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] Thunderbolt 4 SSD Speeds Throttled to USB 3.0 on macOS Sequoia 15.1: Diagnostic steps and permanent fix

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #86145
    Kullanıcı ProfiliClara Hayes
    Community Contributor
    Diagnostic Hardware Specs: Mac Studio M1 Ultra | OS Version: macOS Sequoia 15.1 | Archive Source: Apple Support Community #256385578

    I am running into a persistent issue on my Mac Studio M1 Ultra running macOS Sequoia 15.1.
    Whenever the machine encounters Passive cable PCIe link negotiation falling back to USB 3.2 Gen 2, the following diagnostic log appears in Console:

    kernel: [IOThunderboltFamily] Port 1 PCIe tunnel timeout - falling back to xHCI 10Gbps bridge

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Apple Vision Pro (1TB) | Mac mini M4 Pro (48GB) | Studio Display | Los Angeles, CA
    visionOS Spatial Computing Developer | "Verified Apple Discussions Archive"
    #86146
    Kullanıcı ProfiliLauren Scott
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Verifying certified 40Gbps active cables, resetting Thunderbolt kernel extensions, and enabling TRIM.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Verify cable has official Thunderbolt 4 lightning bolt and ‘4’ logo. Charging cables will not negotiate PCIe.
    2. Reset bus enumeration: sudo killall -9 diskarbitrationd.
    3. Enable APFS TRIM support: sudo trimforce enable.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Pro 14″ M4 (32GB) | Studio Display | YubiKey 5C NFC | Paris, FR
    Apple Certified Support Professional (ACSP) | Enterprise Mac Sysadmin & Jamf Pro Architect
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.