Skip to content
[Solved] Thunderbolt 4 SSD Speeds Throttled to USB 3.0 on macOS Sonoma 14.6.1: Diagnostic steps and permanent fixMappleCare Community ↗

[Solved] Thunderbolt 4 SSD Speeds Throttled to USB 3.0 on macOS Sonoma 14.6.1: Diagnostic steps and permanent fix

Started by Ann Bell • November 17, 2026 at 12:26 pm • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] Thunderbolt 4 SSD Speeds Throttled to USB 3.0 on macOS Sonoma 14.6.1: Diagnostic steps and permanent fix

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #66372
    Kullanıcı ProfiliAnn Bell
    Community Contributor
    Diagnostic Hardware Specs: Mac Studio M1 Ultra | OS Version: macOS Sonoma 14.6.1 | Archive Source: Apple Support Community #256093616

    I am running into a persistent issue on my Mac Studio M1 Ultra running macOS Sonoma 14.6.1.
    Whenever the machine encounters Passive cable PCIe link negotiation falling back to USB 3.2 Gen 2, the following diagnostic log appears in Console:

    kernel: [IOThunderboltFamily] Port 1 PCIe tunnel timeout - falling back to xHCI 10Gbps bridge

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 16″ M3 Max (64GB) | Studio Display | iPhone 16 Pro | Helsinki, FI
    iOS / Swift Engineer | "Verified Apple Discussions Archive"
    #66373
    Kullanıcı ProfiliFlorian Miles
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Verifying certified 40Gbps active cables, resetting Thunderbolt kernel extensions, and enabling TRIM.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Verify cable has official Thunderbolt 4 lightning bolt and ‘4’ logo. Charging cables will not negotiate PCIe.
    2. Reset bus enumeration: sudo killall -9 diskarbitrationd.
    3. Enable APFS TRIM support: sudo trimforce enable.

    Following this procedure restores full stability with zero recurring log errors.

    Apple Vision Pro (1TB) | Zeiss Optical Inserts | Munich, Germany
    Apple Certified Support Professional (ACSP) | Mac Sysadmin & DevOps Engineer
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.