Skip to content
[Solved] Thunderbolt 4 SSD Speeds Throttled to USB 3.0 on macOS Sonoma 14.6.1: Diagnostic steps and permanent fixMappleCare Community ↗

[Solved] Thunderbolt 4 SSD Speeds Throttled to USB 3.0 on macOS Sonoma 14.6.1: Diagnostic steps and permanent fix

Started by Max Jackson • November 17, 2026 at 5:46 pm • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] Thunderbolt 4 SSD Speeds Throttled to USB 3.0 on macOS Sonoma 14.6.1: Diagnostic steps and permanent fix

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #71235
    Kullanıcı ProfiliMax Jackson
    Community Contributor
    Diagnostic Hardware Specs: MacBook Pro 16″ M2 Max | OS Version: macOS Sonoma 14.6.1 | Archive Source: Apple Support Community #256474099

    I am running into a persistent issue on my MacBook Pro 16″ M2 Max running macOS Sonoma 14.6.1.
    Whenever the machine encounters Passive cable PCIe link negotiation falling back to USB 3.2 Gen 2, the following diagnostic log appears in Console:

    kernel: [IOThunderboltFamily] Port 1 PCIe tunnel timeout - falling back to xHCI 10Gbps bridge

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 14″ M3 Max (36GB) | BenQ SW321C 4K | San Francisco, CA
    Creative Pro Video Editor | "Verified Apple Discussions Archive"
    #71236
    Kullanıcı ProfiliNicholas King
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Verifying certified 40Gbps active cables, resetting Thunderbolt kernel extensions, and enabling TRIM.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Verify cable has official Thunderbolt 4 lightning bolt and ‘4’ logo. Charging cables will not negotiate PCIe.
    2. Reset bus enumeration: sudo killall -9 diskarbitrationd.
    3. Enable APFS TRIM support: sudo trimforce enable.

    Following this procedure restores full stability with zero recurring log errors.

    iMac 24″ M4 (32GB, Orange) | AirPods Max USB-C | Toronto, ON
    Apple Certified Support Professional (ACSP) | Creative Pro Video Editor
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.