MappleCare Community
MappleCare Community Forums
Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.
Forum Replies Created
Viewing 2 posts - 1 through 2 (of 2 total)
-
AuthorPosts
-
November 15, 2026 at 9:51 pm in reply to: [Solved] MacBook Pro 16″ M3 Max MagSafe 3 Blinking Amber LED and Refusing to Charge (macOS Sequoia 15.1) – Verified Troubleshooting #34209
Abigail YoungCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
- Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
- Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.
Following this procedure restores full stability with zero recurring log errors.
MacBook Air 13″ M2 (16GB) | Magic Trackpad 2 | San Francisco, CAApple Certified Support Professional (ACSP) | iOS Security ResearcherNovember 15, 2026 at 5:37 pm in reply to: [Solved] iPhone 16 Pro HomeKit Location Automations ‘When Anyone Arrives’ Failing to Trigger (iOS 18.1) – Verified Troubleshooting #31258
Abigail YoungCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Re-authorizing HomeKit location services and setting Find My primary device.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- On iPhone, navigate to Settings > Privacy & Security > Location Services > System Services and ensure HomeKit is enabled.
- In Settings > [Your Name] > Find My, confirm My Location says ‘This Device’.
- In Home app, tap Home Settings > Location Services and toggle off, wait 10 seconds, and toggle back on.
Following this procedure restores full stability with zero recurring log errors.
MacBook Air 13″ M2 (16GB) | Magic Trackpad 2 | San Francisco, CAApple Certified Support Professional (ACSP) | iOS Security Researcher -
AuthorPosts
Viewing 2 posts - 1 through 2 (of 2 total)