MappleCare Community
MappleCare Community Forums
Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.
Forum Replies Created
Viewing 2 posts - 1 through 2 (of 2 total)
-
AuthorPosts
-
November 15, 2026 at 10:26 pm in reply to: [Solved] macOS Installer Error: ‘An error occurred preparing software update’ on macOS Sequoia 15.1: Diagnostic steps and permanent fix #34749
Arnaud HolmesCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Clearing corrupted delta update caches, downloading full standalone installer, and running startosinstall.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Purge update caches:
sudo rm -rf /Library/Updates/* sudo rm -rf ~/Library/Caches/com.apple.SoftwareUpdate/* - Download full installer:
softwareupdate --fetch-full-installer --full-installer-version 15.1. - Execute terminal installer:
sudo /Applications/Install macOS Sequoia.app/Contents/Resources/startosinstall --agreetolicense --forcequitapps.
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 14″ M3 Max (36GB) | BenQ SW321C 4K | Berlin, GermanyApple Certified Support Professional (ACSP) | iOS Security ResearcherNovember 15, 2026 at 9:53 pm in reply to: [Solved] How to fix MagSafe 3 Blinking Amber LED and Refusing to Charge caused by SMC Power Delivery controller handshake fault on MacBook Pro 14″ M2 Pro #34223
Arnaud HolmesCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
- Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
- Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 14″ M3 Max (36GB) | BenQ SW321C 4K | Berlin, GermanyApple Certified Support Professional (ACSP) | iOS Security Researcher - Purge update caches:
-
AuthorPosts
Viewing 2 posts - 1 through 2 (of 2 total)