MappleCare Community
MappleCare Community Forums
Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.
Forum Replies Created
-
AuthorPosts
-
November 16, 2026 at 12:18 am in reply to: [Solved] Restore Error {err} in Finder / iTunes on iOS 18.1: Diagnostic steps and permanent fix #36115
Asher JenkinsCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Direct Thunderbolt connection, forcing true DFU mode, and executing an in-place software update or Configurator revive.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Never select ‘Restore’ if data is unbacked-up; always select Update.
- Use an authentic Apple USB-C 60W/240W cable connected directly to Mac ports (no hubs).
- Enter true black-screen DFU mode and execute an Apple Configurator Revive Device pass.
Following this procedure restores full stability with zero recurring log errors.
Mac Studio M3 Ultra (192GB) | Pro Display XDR 6K | Sydney, NSWApple Certified Support Professional (ACSP) | HomeKit / Matter IoT Integrator
Asher JenkinsCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Flushing AudioUnit cache plist and triggering an isolated AU validation pass.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Quit Logic Pro and delete the corrupt cache:
rm -f ~/Library/Caches/AudioUnitCache/com.apple.audiounits.cache - Kill core audio daemon:
sudo killall -9 coreaudiod - Open Logic Pro, navigate to Settings > Plug-in Manager, locate the crashed AU plugin, and click Reset & Rescan Selection.
Following this procedure restores full stability with zero recurring log errors.
Mac Studio M3 Ultra (192GB) | Pro Display XDR 6K | Sydney, NSWApple Certified Support Professional (ACSP) | HomeKit / Matter IoT IntegratorNovember 15, 2026 at 7:50 pm in reply to: [Solved] AirPods Pro 2 AirPods Pro 2 Static Noise in Earbud During ANC Mode (iOS 18.1) – Verified Troubleshooting #32489
Asher JenkinsCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Deep cleaning outer black microphone mesh using dry adhesive putty and performing 15-second case reset.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Remove silicone ear tip. Press dry Blu-Tack adhesive putty firmly against the outer oval microphone grilles and pull away sharply.
- Place AirPods in case, close lid 30s. Open lid, hold back button for 15s until LED flashes amber, then white.
- Re-pair with iPhone. If noise persists, visit Apple Store for acoustic fixture testing.
Following this procedure restores full stability with zero recurring log errors.
Mac Studio M3 Ultra (192GB) | Pro Display XDR 6K | Sydney, NSWApple Certified Support Professional (ACSP) | HomeKit / Matter IoT Integrator -
AuthorPosts