MappleCare Community
MappleCare Community Forums
Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.
Forum Replies Created
-
AuthorPosts
-
November 15, 2026 at 11:08 pm in reply to: [Solved] ProRes Log 4K 120fps Video Recording Dropping Frames on iPhone 15 Pro Max 1TB: How to resolve External USB-C SSD write speed cache exhaustion #35383
Astrid MayCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Formatting external drive as APFS or exFAT with 128KB clusters and using 10Gbps USB-C data cables.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Format the external SSD on a Mac as APFS for optimal sequential write consistency.
- Ensure cable is rated for 10Gbps or 20Gbps (USB 3.2 Gen 2×2); in-box white charging cables are USB 2.0 (40MB/s).
- Use drives with sustained non-SLC cache write capabilities (e.g. SanDisk Extreme Pro v2 or Crucial T700 enclosures).
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 16″ M4 Max (128GB) | Studio Display 5K | Amsterdam, NetherlandsApple Certified Support Professional (ACSP) | Apple Silicon Architecture LeadNovember 15, 2026 at 11:06 pm in reply to: [Solved] MacBook Pro 14″ M3 macOS Installer Error: ‘An error occurred preparing software update’ (macOS Sonoma 14.6) – Verified Troubleshooting #35369
Astrid MayCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Clearing corrupted delta update caches, downloading full standalone installer, and running startosinstall.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Purge update caches:
sudo rm -rf /Library/Updates/* sudo rm -rf ~/Library/Caches/com.apple.SoftwareUpdate/* - Download full installer:
softwareupdate --fetch-full-installer --full-installer-version 15.1. - Execute terminal installer:
sudo /Applications/Install macOS Sequoia.app/Contents/Resources/startosinstall --agreetolicense --forcequitapps.
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 16″ M4 Max (128GB) | Studio Display 5K | Amsterdam, NetherlandsApple Certified Support Professional (ACSP) | Apple Silicon Architecture LeadNovember 15, 2026 at 8:58 pm in reply to: [Solved] MagSafe 3 Blinking Amber LED and Refusing to Charge on macOS Sequoia 15.1: Diagnostic steps and permanent fix #33473
Astrid MayCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
- Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
- Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 16″ M4 Max (128GB) | Studio Display 5K | Amsterdam, NetherlandsApple Certified Support Professional (ACSP) | Apple Silicon Architecture Lead -
AuthorPosts