MappleCare Community
MappleCare Community Forums
Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.
Forum Replies Created
Viewing 2 posts - 1 through 2 (of 2 total)
-
AuthorPosts
-
November 16, 2026 at 1:24 am in reply to: [Solved] MacBook Pro 16″ M1 Pro MagSafe 3 Blinking Amber LED and Refusing to Charge (macOS Sequoia 15.1) – Verified Troubleshooting #36642
Ava GardnerCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
- Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
- Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 16″ M1 Max (64GB, Workhorse) | Dell U3224KB | Melbourne, VICApple Certified Support Professional (ACSP) | Senior macOS Reliability Eng
Ava GardnerCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Purging generated project render files and disabling Optical Flow on speed-ramped clips.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- In Final Cut Pro, select your Project in the browser, go to File > Delete Generated Project Files, and select Delete Render Files (All).
- Select any re-timed/speed-ramped clips, open the Video Inspector, and change Video Quality from Optical Flow to Frame Blending.
- Export destination should be an internal APFS location first before transferring to external storage.
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 16″ M1 Max (64GB, Workhorse) | Dell U3224KB | Melbourne, VICApple Certified Support Professional (ACSP) | Senior macOS Reliability Eng -
AuthorPosts
Viewing 2 posts - 1 through 2 (of 2 total)