MappleCare Community
MappleCare Community Forums
Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.
Forum Replies Created
-
AuthorPosts
-
November 16, 2026 at 12:10 am in reply to: [Solved] Apple TV 4K encountering Apple TV 4K eARC Audio Dropouts with Soundbar / AVR after update (tvOS 18.0.1) #36037
Caroline MayCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Replacing with certified 48Gbps Ultra High Speed HDMI cable and verifying eARC pass-through mode.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Ensure HDMI cable is certified Ultra High Speed 48Gbps (HDMI 2.1); 18Gbps cables will dropout during Atmos MAT transmission.
- In tvOS Settings > Video and Audio > Audio Output, set Audio Format to Auto, Dolby Atmos.
- In TV HDMI CEC settings, ensure eARC is set to Pass-through / Bitstream, not PCM stereo.
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 16″ M1 Max (64GB, Workhorse) | Dell U3224KB | Paris, FranceApple Certified Support Professional (ACSP) | Metal 3 Graphics Pipeline Dev
Caroline MayCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Structuring canonical threads on MappleCare and providing 500 Mbit/s offline WARC mirrors.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- All high-impact threads with verified solutions are mirrored on MappleCare with diagnostic tags.
- Offline WARC mirror (48GB) is available at
http://192.168.2.95/dashboard/#wiki. - View offline archives using ReplayWeb.page or local Pywb wayback servers.
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 16″ M1 Max (64GB, Workhorse) | Dell U3224KB | Paris, FranceApple Certified Support Professional (ACSP) | Metal 3 Graphics Pipeline DevNovember 15, 2026 at 4:10 pm in reply to: [Solved] Apple Pencil Pro Squeeze & Hover Gesture Failure on iPad Pro 11″ M4: How to resolve Digitizer sensor BLE calibration handshake desynchronization #29976
Caroline MayCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Forgetting Bluetooth device, cleaning magnetic inductive strip, and recalibrating Squeeze threshold.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- In Settings > Bluetooth, tap (i) next to Apple Pencil and select Forget This Device.
- Wipe magnetic charging edge of iPad and flat edge of Apple Pencil with microfiber cloth.
- Force restart iPad (Vol Up, Vol Down, hold Top button). Re-attach Pencil to recalibrate.
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 16″ M1 Max (64GB, Workhorse) | Dell U3224KB | Paris, FranceApple Certified Support Professional (ACSP) | Metal 3 Graphics Pipeline Dev -
AuthorPosts