MappleCare Community
MappleCare Community Forums
Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.
Forum Replies Created
-
AuthorPosts
-
November 15, 2026 at 11:38 pm in reply to: [Solved] How to fix MagSafe 3 Blinking Amber LED and Refusing to Charge caused by SMC Power Delivery controller handshake fault on MacBook Pro 16″ M3 Max #35696
Craig FreemanCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
- Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
- Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.
Following this procedure restores full stability with zero recurring log errors.
iPhone 15 Pro (256GB) | Apple Watch Series 10 | Copenhagen, DenmarkApple Certified Support Professional (ACSP) | Apple Certified Mac TechnicianNovember 15, 2026 at 11:01 pm in reply to: [Solved] How to fix MagSafe 3 Blinking Amber LED and Refusing to Charge caused by SMC Power Delivery controller handshake fault on MacBook Pro 16″ M3 Max #35295
Craig FreemanCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
- Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
- Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.
Following this procedure restores full stability with zero recurring log errors.
iPhone 15 Pro (256GB) | Apple Watch Series 10 | Copenhagen, DenmarkApple Certified Support Professional (ACSP) | Apple Certified Mac TechnicianNovember 15, 2026 at 7:57 pm in reply to: [Solved] iPad Pro 11″ M4 encountering Apple Pencil Pro Squeeze & Hover Gesture Failure after update (iPadOS 18.0.1) #32593
Craig FreemanCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Forgetting Bluetooth device, cleaning magnetic inductive strip, and recalibrating Squeeze threshold.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- In Settings > Bluetooth, tap (i) next to Apple Pencil and select Forget This Device.
- Wipe magnetic charging edge of iPad and flat edge of Apple Pencil with microfiber cloth.
- Force restart iPad (Vol Up, Vol Down, hold Top button). Re-attach Pencil to recalibrate.
Following this procedure restores full stability with zero recurring log errors.
iPhone 15 Pro (256GB) | Apple Watch Series 10 | Copenhagen, DenmarkApple Certified Support Professional (ACSP) | Apple Certified Mac TechnicianNovember 15, 2026 at 6:53 pm in reply to: [Solved] How to fix Camera Control Button Accidental Palm Activations caused by Capacitive sensor threshold over-sensitivity in one-handed grip on iPhone 16 Plus #31813
Craig FreemanCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Tuning force pressure settings to Firmer and changing launch trigger from Single Click to Double Click.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Go to Settings > Accessibility > Camera Control. Change Pressure and Light Press Sensitivity to Firmer.
- In Settings > Camera > Camera Control, change Launch Camera to Double Click.
- Disable swipe gesture adjustments if exposure sliding is not required.
Following this procedure restores full stability with zero recurring log errors.
iPhone 15 Pro (256GB) | Apple Watch Series 10 | Copenhagen, DenmarkApple Certified Support Professional (ACSP) | Apple Certified Mac Technician -
AuthorPosts