MappleCare Community
MappleCare Community Forums
Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.
Forum Replies Created
-
AuthorPosts
-
November 16, 2026 at 1:14 am in reply to: [Solved] Clean Energy Charging Pausing Battery at 80% Overnight on iOS 18.1: Diagnostic steps and permanent fix #36486
Derek DavidsonCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Disabling Clean Energy Charging toggle or overriding charging hold directly from lock screen.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Navigate to Settings > Battery > Charging Optimization.
- Toggle Clean Energy Charging to OFF.
- For an immediate top-off, long press the lock screen notification and select Charge to 100% Now.
Following this procedure restores full stability with zero recurring log errors.
Mac Studio M3 Ultra (192GB) | Pro Display XDR 6K | SingaporeApple Certified Support Professional (ACSP) | SwiftUI & VisionOS Specialist
Derek DavidsonCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Replacing with certified 48Gbps Ultra High Speed HDMI cable and verifying eARC pass-through mode.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Ensure HDMI cable is certified Ultra High Speed 48Gbps (HDMI 2.1); 18Gbps cables will dropout during Atmos MAT transmission.
- In tvOS Settings > Video and Audio > Audio Output, set Audio Format to Auto, Dolby Atmos.
- In TV HDMI CEC settings, ensure eARC is set to Pass-through / Bitstream, not PCM stereo.
Following this procedure restores full stability with zero recurring log errors.
Mac Studio M3 Ultra (192GB) | Pro Display XDR 6K | SingaporeApple Certified Support Professional (ACSP) | SwiftUI & VisionOS SpecialistNovember 15, 2026 at 3:33 pm in reply to: [Solved] How to fix Apple Pencil Pro Squeeze & Hover Gesture Failure caused by Digitizer sensor BLE calibration handshake desynchronization on iPad Pro 13″ M4 #29568
Derek DavidsonCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Forgetting Bluetooth device, cleaning magnetic inductive strip, and recalibrating Squeeze threshold.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- In Settings > Bluetooth, tap (i) next to Apple Pencil and select Forget This Device.
- Wipe magnetic charging edge of iPad and flat edge of Apple Pencil with microfiber cloth.
- Force restart iPad (Vol Up, Vol Down, hold Top button). Re-attach Pencil to recalibrate.
Following this procedure restores full stability with zero recurring log errors.
Mac Studio M3 Ultra (192GB) | Pro Display XDR 6K | SingaporeApple Certified Support Professional (ACSP) | SwiftUI & VisionOS Specialist -
AuthorPosts