MappleCare Community
MappleCare Community Forums
Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.
Forum Replies Created
-
AuthorPosts
-
November 16, 2026 at 12:08 am in reply to: [Solved] iPhone 15 Plus encountering Clean Energy Charging Pausing Battery at 80% Overnight after update (iOS 18.0.2) #36001
Eleanor CooperCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Disabling Clean Energy Charging toggle or overriding charging hold directly from lock screen.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Navigate to Settings > Battery > Charging Optimization.
- Toggle Clean Energy Charging to OFF.
- For an immediate top-off, long press the lock screen notification and select Charge to 100% Now.
Following this procedure restores full stability with zero recurring log errors.
MacBook Air 13″ M2 (16GB) | Magic Trackpad 2 | Chicago, ILApple Certified Support Professional (ACSP) | HomeKit / Matter IoT IntegratorNovember 15, 2026 at 7:13 pm in reply to: [Solved] MagSafe 3 Blinking Amber LED and Refusing to Charge on macOS Sonoma 14.6: Diagnostic steps and permanent fix #32045
Eleanor CooperCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
- Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
- Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.
Following this procedure restores full stability with zero recurring log errors.
MacBook Air 13″ M2 (16GB) | Magic Trackpad 2 | Chicago, ILApple Certified Support Professional (ACSP) | HomeKit / Matter IoT IntegratorNovember 15, 2026 at 5:41 pm in reply to: [Solved] Mac Virtual Display Ultra-Wide Mode Connection Dropping on visionOS 2.0 + macOS Sequoia 15.0.1: Diagnostic steps and permanent fix #31336
Eleanor CooperCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Locking Wi-Fi to a dedicated 5GHz/6GHz SSID, toggling AirPlay Receiver, and renewing Handoff tokens.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Ensure both Mac and Vision Pro are connected to the exact same 5GHz/6GHz Wi-Fi band without band-steering.
- On Mac, open System Settings > General > AirPlay & Continuity and toggle AirPlay Receiver off and on.
- In visionOS Control Center, bring Mac Virtual Display window within 2 meters, select Connect, and set resolution to Ultra-Wide (4K equivalent).
Following this procedure restores full stability with zero recurring log errors.
MacBook Air 13″ M2 (16GB) | Magic Trackpad 2 | Chicago, ILApple Certified Support Professional (ACSP) | HomeKit / Matter IoT IntegratorNovember 15, 2026 at 3:09 pm in reply to: [Solved] iPad Air 11″ M2 encountering Apple Pencil Pro Squeeze & Hover Gesture Failure after update (iPadOS 18.1) #29171
Eleanor CooperCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Forgetting Bluetooth device, cleaning magnetic inductive strip, and recalibrating Squeeze threshold.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- In Settings > Bluetooth, tap (i) next to Apple Pencil and select Forget This Device.
- Wipe magnetic charging edge of iPad and flat edge of Apple Pencil with microfiber cloth.
- Force restart iPad (Vol Up, Vol Down, hold Top button). Re-attach Pencil to recalibrate.
Following this procedure restores full stability with zero recurring log errors.
MacBook Air 13″ M2 (16GB) | Magic Trackpad 2 | Chicago, ILApple Certified Support Professional (ACSP) | HomeKit / Matter IoT Integrator
Eleanor CooperCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Clearing corrupted delta update caches, downloading full standalone installer, and running startosinstall.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Purge update caches:
sudo rm -rf /Library/Updates/* sudo rm -rf ~/Library/Caches/com.apple.SoftwareUpdate/* - Download full installer:
softwareupdate --fetch-full-installer --full-installer-version 15.1. - Execute terminal installer:
sudo /Applications/Install macOS Sequoia.app/Contents/Resources/startosinstall --agreetolicense --forcequitapps.
Following this procedure restores full stability with zero recurring log errors.
MacBook Air 13″ M2 (16GB) | Magic Trackpad 2 | Chicago, ILApple Certified Support Professional (ACSP) | HomeKit / Matter IoT Integrator -
AuthorPosts