MappleCare Community
MappleCare Community Forums
Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.
Forum Replies Created
Viewing 2 posts - 1 through 2 (of 2 total)
-
AuthorPosts
-
November 16, 2026 at 7:34 pm in reply to: [Solved] How to fix ProRes Log 4K 120fps Video Recording Dropping Frames caused by External USB-C SSD write speed cache exhaustion on iPhone 15 Pro Max 1TB #49436
Frederik UnderwoodCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Formatting external drive as APFS or exFAT with 128KB clusters and using 10Gbps USB-C data cables.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Format the external SSD on a Mac as APFS for optimal sequential write consistency.
- Ensure cable is rated for 10Gbps or 20Gbps (USB 3.2 Gen 2×2); in-box white charging cables are USB 2.0 (40MB/s).
- Use drives with sustained non-SLC cache write capabilities (e.g. SanDisk Extreme Pro v2 or Crucial T700 enclosures).
Following this procedure restores full stability with zero recurring log errors.
iPad Air 13″ M2 (256GB) | Apple Pencil Pro | Manchester, UKApple Certified Support Professional (ACSP) | HomeKit / Matter IoT IntegratorNovember 16, 2026 at 4:01 pm in reply to: [Solved] MacBook Pro 14″ M2 Pro encountering MagSafe 3 Blinking Amber LED and Refusing to Charge after update (macOS Sequoia 15.1) #45835
Frederik UnderwoodCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
- Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
- Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.
Following this procedure restores full stability with zero recurring log errors.
iPad Air 13″ M2 (256GB) | Apple Pencil Pro | Manchester, UKApple Certified Support Professional (ACSP) | HomeKit / Matter IoT Integrator -
AuthorPosts
Viewing 2 posts - 1 through 2 (of 2 total)