Skip to content
MappleCare Community ↗

MappleCare Community

Gabriel Bryant

Find answers from other Apple users or start a discussion about your device.

All Forum Rooms

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 14, 2026 at 11:29 pm in reply to: [Solved] Clean Energy Charging Pausing Battery at 80% Overnight on iPhone 15 Pro: How to resolve Regional carbon forecast algorithm holding battery level #14580
    Gabriel Bryant
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Disabling Clean Energy Charging toggle or overriding charging hold directly from lock screen.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Navigate to Settings > Battery > Charging Optimization.
    2. Toggle Clean Energy Charging to OFF.
    3. For an immediate top-off, long press the lock screen notification and select Charge to 100% Now.

    Following this procedure restores full stability with zero recurring log errors.

    Mac Studio M2 Ultra (192GB) | Universal Audio Apollo x8p | Logic Pro 11 | Minneapolis, MN
    Apple Certified Support Professional (ACSP) | Logic Pro Audio Producer & Mixing Engineer
    November 14, 2026 at 10:45 pm in reply to: [Solved] AirPods Pro 2 encountering AirPods Pro 2 Static Noise in Earbud During ANC Mode after update (iOS 18.1) #13808
    Gabriel Bryant
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Deep cleaning outer black microphone mesh using dry adhesive putty and performing 15-second case reset.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Remove silicone ear tip. Press dry Blu-Tack adhesive putty firmly against the outer oval microphone grilles and pull away sharply.
    2. Place AirPods in case, close lid 30s. Open lid, hold back button for 15s until LED flashes amber, then white.
    3. Re-pair with iPhone. If noise persists, visit Apple Store for acoustic fixture testing.

    Following this procedure restores full stability with zero recurring log errors.

    Mac Studio M2 Ultra (192GB) | Universal Audio Apollo x8p | Logic Pro 11 | Minneapolis, MN
    Apple Certified Support Professional (ACSP) | Logic Pro Audio Producer & Mixing Engineer
    November 14, 2026 at 10:22 pm in reply to: [Solved] Apple Vision Pro 1TB + Mac Studio M2 Ultra encountering Mac Virtual Display Ultra-Wide Mode Connection Dropping after update (visionOS 2.1 + macOS Sequoia 15.1) #13394
    Gabriel Bryant
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking Wi-Fi to a dedicated 5GHz/6GHz SSID, toggling AirPlay Receiver, and renewing Handoff tokens.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Ensure both Mac and Vision Pro are connected to the exact same 5GHz/6GHz Wi-Fi band without band-steering.
    2. On Mac, open System Settings > General > AirPlay & Continuity and toggle AirPlay Receiver off and on.
    3. In visionOS Control Center, bring Mac Virtual Display window within 2 meters, select Connect, and set resolution to Ultra-Wide (4K equivalent).

    Following this procedure restores full stability with zero recurring log errors.

    Mac Studio M2 Ultra (192GB) | Universal Audio Apollo x8p | Logic Pro 11 | Minneapolis, MN
    Apple Certified Support Professional (ACSP) | Logic Pro Audio Producer & Mixing Engineer
  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)