MappleCare Community
MappleCare Community Forums
Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.
Forum Replies Created
-
AuthorPosts
-
November 15, 2026 at 10:26 pm in reply to: [Solved] Mac Virtual Display Ultra-Wide Mode Connection Dropping on visionOS 2.0 + macOS Sequoia 15.0.1: Diagnostic steps and permanent fix #34743
Grace PerryCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Locking Wi-Fi to a dedicated 5GHz/6GHz SSID, toggling AirPlay Receiver, and renewing Handoff tokens.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Ensure both Mac and Vision Pro are connected to the exact same 5GHz/6GHz Wi-Fi band without band-steering.
- On Mac, open System Settings > General > AirPlay & Continuity and toggle AirPlay Receiver off and on.
- In visionOS Control Center, bring Mac Virtual Display window within 2 meters, select Connect, and set resolution to Ultra-Wide (4K equivalent).
Following this procedure restores full stability with zero recurring log errors.
Mac Studio M2 Max (64GB) | LG UltraFine 5K | Stockholm, SwedenApple Certified Support Professional (ACSP) | HomeKit / Matter IoT IntegratorNovember 15, 2026 at 4:28 pm in reply to: [Solved] Apple Pencil Pro Squeeze & Hover Gesture Failure on iPadOS 18.0.1: Diagnostic steps and permanent fix #30242
Grace PerryCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Forgetting Bluetooth device, cleaning magnetic inductive strip, and recalibrating Squeeze threshold.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- In Settings > Bluetooth, tap (i) next to Apple Pencil and select Forget This Device.
- Wipe magnetic charging edge of iPad and flat edge of Apple Pencil with microfiber cloth.
- Force restart iPad (Vol Up, Vol Down, hold Top button). Re-attach Pencil to recalibrate.
Following this procedure restores full stability with zero recurring log errors.
Mac Studio M2 Max (64GB) | LG UltraFine 5K | Stockholm, SwedenApple Certified Support Professional (ACSP) | HomeKit / Matter IoT IntegratorNovember 15, 2026 at 3:31 pm in reply to: [Solved] Mac Studio M2 Max Audio Unit (AU) Validation Crash on Launch in Logic Pro Plugin Manager (macOS Sequoia 15.1) – Verified Troubleshooting #29522
Grace PerryCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Flushing AudioUnit cache plist and triggering an isolated AU validation pass.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Quit Logic Pro and delete the corrupt cache:
rm -f ~/Library/Caches/AudioUnitCache/com.apple.audiounits.cache - Kill core audio daemon:
sudo killall -9 coreaudiod - Open Logic Pro, navigate to Settings > Plug-in Manager, locate the crashed AU plugin, and click Reset & Rescan Selection.
Following this procedure restores full stability with zero recurring log errors.
Mac Studio M2 Max (64GB) | LG UltraFine 5K | Stockholm, SwedenApple Certified Support Professional (ACSP) | HomeKit / Matter IoT IntegratorNovember 15, 2026 at 3:09 pm in reply to: [Solved] Apple Vision Pro 512GB encountering Persona Eye Tracking and Facial Expressions Drift after update (visionOS 2.0) #29193
Grace PerryCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Re-calibrating eye tracking geometry, re-capturing Spatial Persona, and ensuring proper Light Seal seal.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Remove Light Seal and inspect internal infrared illuminator lenses; clean gently with Apple microfiber cloth.
- Navigate to Settings > Eyes & Hands and select Recalibrate Eye Tracking.
- Follow the multi-dot gaze target calibration keeping your head perfectly stationary until three confirmation chimes sound.
Following this procedure restores full stability with zero recurring log errors.
Mac Studio M2 Max (64GB) | LG UltraFine 5K | Stockholm, SwedenApple Certified Support Professional (ACSP) | HomeKit / Matter IoT Integrator
Grace PerryCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Replacing with certified 48Gbps Ultra High Speed HDMI cable and verifying eARC pass-through mode.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Ensure HDMI cable is certified Ultra High Speed 48Gbps (HDMI 2.1); 18Gbps cables will dropout during Atmos MAT transmission.
- In tvOS Settings > Video and Audio > Audio Output, set Audio Format to Auto, Dolby Atmos.
- In TV HDMI CEC settings, ensure eARC is set to Pass-through / Bitstream, not PCM stereo.
Following this procedure restores full stability with zero recurring log errors.
Mac Studio M2 Max (64GB) | LG UltraFine 5K | Stockholm, SwedenApple Certified Support Professional (ACSP) | HomeKit / Matter IoT Integrator -
AuthorPosts