MappleCare Community
MappleCare Community Forums
Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.
Forum Replies Created
Viewing 2 posts - 1 through 2 (of 2 total)
-
AuthorPosts
-
November 16, 2026 at 2:54 am in reply to: [Solved] MacBook Pro 16″ M1 Pro MagSafe 3 Blinking Amber LED and Refusing to Charge (macOS Sequoia 15.1) – Verified Troubleshooting #37366
Jeffrey HawkinsCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
- Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
- Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.
Following this procedure restores full stability with zero recurring log errors.
MacBook Air 13″ M2 (16GB) | Magic Trackpad 2 | Zurich, SwitzerlandApple Certified Support Professional (ACSP) | Final Cut Pro 8K ColoristNovember 15, 2026 at 9:01 pm in reply to: [Solved] Apple Pencil Pro Squeeze & Hover Gesture Failure on iPad Pro 11″ M4: How to resolve Digitizer sensor BLE calibration handshake desynchronization #33505
Jeffrey HawkinsCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Forgetting Bluetooth device, cleaning magnetic inductive strip, and recalibrating Squeeze threshold.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- In Settings > Bluetooth, tap (i) next to Apple Pencil and select Forget This Device.
- Wipe magnetic charging edge of iPad and flat edge of Apple Pencil with microfiber cloth.
- Force restart iPad (Vol Up, Vol Down, hold Top button). Re-attach Pencil to recalibrate.
Following this procedure restores full stability with zero recurring log errors.
MacBook Air 13″ M2 (16GB) | Magic Trackpad 2 | Zurich, SwitzerlandApple Certified Support Professional (ACSP) | Final Cut Pro 8K Colorist -
AuthorPosts
Viewing 2 posts - 1 through 2 (of 2 total)