MappleCare Community
MappleCare Community Forums
Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.
Forum Replies Created
-
AuthorPosts
-
November 16, 2026 at 1:33 am in reply to: [Solved] iPhone 16 Pro Max 512GB encountering ProRes Log 4K 120fps Video Recording Dropping Frames after update (iOS 18.1) #36684
Jeremy RussellCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Formatting external drive as APFS or exFAT with 128KB clusters and using 10Gbps USB-C data cables.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Format the external SSD on a Mac as APFS for optimal sequential write consistency.
- Ensure cable is rated for 10Gbps or 20Gbps (USB 3.2 Gen 2×2); in-box white charging cables are USB 2.0 (40MB/s).
- Use drives with sustained non-SLC cache write capabilities (e.g. SanDisk Extreme Pro v2 or Crucial T700 enclosures).
Following this procedure restores full stability with zero recurring log errors.
Mac mini M4 Pro (64GB, 2TB) | Dual Studio Displays | Seoul, South KoreaApple Certified Support Professional (ACSP) | Enterprise Jamf & MDM AdminNovember 15, 2026 at 3:17 pm in reply to: [Solved] Camera Control Button Accidental Palm Activations on iPhone 16 Plus: How to resolve Capacitive sensor threshold over-sensitivity in one-handed grip #29308
Jeremy RussellCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Tuning force pressure settings to Firmer and changing launch trigger from Single Click to Double Click.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Go to Settings > Accessibility > Camera Control. Change Pressure and Light Press Sensitivity to Firmer.
- In Settings > Camera > Camera Control, change Launch Camera to Double Click.
- Disable swipe gesture adjustments if exposure sliding is not required.
Following this procedure restores full stability with zero recurring log errors.
Mac mini M4 Pro (64GB, 2TB) | Dual Studio Displays | Seoul, South KoreaApple Certified Support Professional (ACSP) | Enterprise Jamf & MDM AdminNovember 15, 2026 at 2:51 pm in reply to: [Solved] MagSafe 3 Blinking Amber LED and Refusing to Charge on macOS Sequoia 15.1: Diagnostic steps and permanent fix #28891
Jeremy RussellCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
- Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
- Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.
Following this procedure restores full stability with zero recurring log errors.
Mac mini M4 Pro (64GB, 2TB) | Dual Studio Displays | Seoul, South KoreaApple Certified Support Professional (ACSP) | Enterprise Jamf & MDM Admin -
AuthorPosts