MappleCare Community
MappleCare Community Forums
Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.
Forum Replies Created
-
AuthorPosts
-
November 15, 2026 at 5:23 pm in reply to: [Solved] Apple Pencil Pro Squeeze & Hover Gesture Failure on iPadOS 18.0.1: Diagnostic steps and permanent fix #31042
Joel NicholsCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Forgetting Bluetooth device, cleaning magnetic inductive strip, and recalibrating Squeeze threshold.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- In Settings > Bluetooth, tap (i) next to Apple Pencil and select Forget This Device.
- Wipe magnetic charging edge of iPad and flat edge of Apple Pencil with microfiber cloth.
- Force restart iPad (Vol Up, Vol Down, hold Top button). Re-attach Pencil to recalibrate.
Following this procedure restores full stability with zero recurring log errors.
MacBook Air 13″ M2 (16GB) | Magic Trackpad 2 | Zurich, SwitzerlandApple Certified Support Professional (ACSP) | Creative Pro Video EditorNovember 15, 2026 at 4:37 pm in reply to: [Solved] iPhone 16 Pro 256GB encountering ProRes Log 4K 120fps Video Recording Dropping Frames after update (iOS 18.0) #30388
Joel NicholsCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Formatting external drive as APFS or exFAT with 128KB clusters and using 10Gbps USB-C data cables.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Format the external SSD on a Mac as APFS for optimal sequential write consistency.
- Ensure cable is rated for 10Gbps or 20Gbps (USB 3.2 Gen 2×2); in-box white charging cables are USB 2.0 (40MB/s).
- Use drives with sustained non-SLC cache write capabilities (e.g. SanDisk Extreme Pro v2 or Crucial T700 enclosures).
Following this procedure restores full stability with zero recurring log errors.
MacBook Air 13″ M2 (16GB) | Magic Trackpad 2 | Zurich, SwitzerlandApple Certified Support Professional (ACSP) | Creative Pro Video Editor
Joel NicholsCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Increasing I/O buffer sample size, maximizing processing threads, and freezing high-CPU synth tracks.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Navigate to Logic Pro > Settings > Audio > Devices and set I/O Buffer Size to 512 samples (or 1024 for mixing).
- Set Processing Threads from ‘Automatic’ to the maximum available performance cores.
- Enable Track Freeze on tracks with resource-heavy synthesizers or convolution reverbs.
Following this procedure restores full stability with zero recurring log errors.
MacBook Air 13″ M2 (16GB) | Magic Trackpad 2 | Zurich, SwitzerlandApple Certified Support Professional (ACSP) | Creative Pro Video EditorNovember 15, 2026 at 2:40 pm in reply to: [Solved] MacBook Pro 14″ M2 Pro encountering MagSafe 3 Blinking Amber LED and Refusing to Charge after update (macOS Sequoia 15.1) #28713
Joel NicholsCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
- Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
- Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.
Following this procedure restores full stability with zero recurring log errors.
MacBook Air 13″ M2 (16GB) | Magic Trackpad 2 | Zurich, SwitzerlandApple Certified Support Professional (ACSP) | Creative Pro Video Editor -
AuthorPosts