Skip to content
MappleCare Community ↗

MappleCare Community

MappleCare Community Forums

Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.

All Forum Rooms

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • Lawrence Richards
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
    2. Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
    3. Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.

    Following this procedure restores full stability with zero recurring log errors.

    iPhone 15 Pro (256GB) | Apple Watch Series 10 | Montreal, QC
    Apple Certified Support Professional (ACSP) | Mac Sysadmin & DevOps Engineer
    Lawrence Richards
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Flushing local keychain daemon caches and re-authenticating with primary device lock screen passcode.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Confirm saved passwords exist locally on your iPhone in Settings > Passwords.
    2. On Mac, turn Passwords & Keychain OFF in iCloud settings.
    3. Purge local keychain cache: rm -rf ~/Library/Keychains/*/ && sudo killall -9 securityd secd.
    4. Re-enable Keychain in iCloud settings and verify identity with iPhone lock screen passcode.

    Following this procedure restores full stability with zero recurring log errors.

    iPhone 15 Pro (256GB) | Apple Watch Series 10 | Montreal, QC
    Apple Certified Support Professional (ACSP) | Mac Sysadmin & DevOps Engineer
    Lawrence Richards
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Inspecting binary slices via lipo, updating dependency architecture flags, and cleaning derived data.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Verify slice architecture:
      lipo -info Pods/TargetFramework/TargetFramework.framework/TargetFramework
    2. In Xcode Build Settings, search for Excluded Architectures and ensure arm64 is NOT excluded for Any iOS/macOS SDK.
    3. Purge build cache:
      rm -rf ~/Library/Developer/Xcode/DerivedData/* && xcodebuild clean

    Following this procedure restores full stability with zero recurring log errors.

    iPhone 15 Pro (256GB) | Apple Watch Series 10 | Montreal, QC
    Apple Certified Support Professional (ACSP) | Mac Sysadmin & DevOps Engineer
Viewing 3 posts - 1 through 3 (of 3 total)