MappleCare Community
MappleCare Community Forums
Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.
Forum Replies Created
Viewing 2 posts - 1 through 2 (of 2 total)
-
AuthorPosts
-
November 15, 2026 at 10:23 pm in reply to: [Solved] MacBook Pro 16″ M3 Max encountering MagSafe 3 Blinking Amber LED and Refusing to Charge after update (macOS Sonoma 14.6) #34707
Linnea CurtisCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
- Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
- Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 14″ M3 Max (36GB) | BenQ SW321C 4K | Seattle, WAApple Certified Support Professional (ACSP) | Metal 3 Graphics Pipeline DevNovember 15, 2026 at 10:07 pm in reply to: [Solved] MacBook Air 15″ M3 encountering Homebrew Command Not Found & PATH Collision on Apple Silicon after update (macOS Sequoia 15.1) #34439
Linnea CurtisCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Injecting official Apple Silicon Homebrew environment evaluation into ~/.zprofile.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Add native ARM64 prefix to profile:
echo 'eval "$(/opt/homebrew/bin/brew shellenv)"' >> ~/.zprofile eval "$(/opt/homebrew/bin/brew shellenv)" - Verify native execution:
which brew file $(which brew) # must output: Mach-O 64-bit executable arm64 - Run diagnosis:
brew doctor
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 14″ M3 Max (36GB) | BenQ SW321C 4K | Seattle, WAApple Certified Support Professional (ACSP) | Metal 3 Graphics Pipeline Dev -
AuthorPosts
Viewing 2 posts - 1 through 2 (of 2 total)