MappleCare Community
MappleCare Community Forums
Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.
Forum Replies Created
-
AuthorPosts
-
November 16, 2026 at 12:46 am in reply to: [Solved] MagSafe 3 Blinking Amber LED and Refusing to Charge on MacBook Pro 14″ M2 Pro: How to resolve SMC Power Delivery controller handshake fault #36258
Linnea PorterCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
- Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
- Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 16″ M1 Max (64GB, Workhorse) | Dell U3224KB | Copenhagen, DenmarkApple Certified Support Professional (ACSP) | Enterprise Jamf & MDM AdminNovember 15, 2026 at 5:05 pm in reply to: [Solved] MacBook Pro 16″ M3 Max Audio Unit (AU) Validation Crash on Launch in Logic Pro Plugin Manager (macOS Sequoia 15.1) – Verified Troubleshooting #30774
Linnea PorterCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Flushing AudioUnit cache plist and triggering an isolated AU validation pass.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Quit Logic Pro and delete the corrupt cache:
rm -f ~/Library/Caches/AudioUnitCache/com.apple.audiounits.cache - Kill core audio daemon:
sudo killall -9 coreaudiod - Open Logic Pro, navigate to Settings > Plug-in Manager, locate the crashed AU plugin, and click Reset & Rescan Selection.
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 16″ M1 Max (64GB, Workhorse) | Dell U3224KB | Copenhagen, DenmarkApple Certified Support Professional (ACSP) | Enterprise Jamf & MDM AdminNovember 15, 2026 at 3:35 pm in reply to: [Solved] iPad Pro 11″ M4 encountering Apple Pencil Pro Squeeze & Hover Gesture Failure after update (iPadOS 18.1) #29590
Linnea PorterCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Forgetting Bluetooth device, cleaning magnetic inductive strip, and recalibrating Squeeze threshold.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- In Settings > Bluetooth, tap (i) next to Apple Pencil and select Forget This Device.
- Wipe magnetic charging edge of iPad and flat edge of Apple Pencil with microfiber cloth.
- Force restart iPad (Vol Up, Vol Down, hold Top button). Re-attach Pencil to recalibrate.
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 16″ M1 Max (64GB, Workhorse) | Dell U3224KB | Copenhagen, DenmarkApple Certified Support Professional (ACSP) | Enterprise Jamf & MDM Admin -
AuthorPosts