Skip to content
MappleCare Community ↗

MappleCare Community

MappleCare Community Forums

Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.

All Forum Rooms

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • Malcolm Henderson
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Inspecting binary slices via lipo, updating dependency architecture flags, and cleaning derived data.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Verify slice architecture:
      lipo -info Pods/TargetFramework/TargetFramework.framework/TargetFramework
    2. In Xcode Build Settings, search for Excluded Architectures and ensure arm64 is NOT excluded for Any iOS/macOS SDK.
    3. Purge build cache:
      rm -rf ~/Library/Developer/Xcode/DerivedData/* && xcodebuild clean

    Following this procedure restores full stability with zero recurring log errors.

    Apple Vision Pro (1TB) | Zeiss Optical Inserts | Melbourne, VIC
    Apple Certified Support Professional (ACSP) | Audio Unit & CoreAudio Architect
    Malcolm Henderson
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Deep cleaning outer black microphone mesh using dry adhesive putty and performing 15-second case reset.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Remove silicone ear tip. Press dry Blu-Tack adhesive putty firmly against the outer oval microphone grilles and pull away sharply.
    2. Place AirPods in case, close lid 30s. Open lid, hold back button for 15s until LED flashes amber, then white.
    3. Re-pair with iPhone. If noise persists, visit Apple Store for acoustic fixture testing.

    Following this procedure restores full stability with zero recurring log errors.

    Apple Vision Pro (1TB) | Zeiss Optical Inserts | Melbourne, VIC
    Apple Certified Support Professional (ACSP) | Audio Unit & CoreAudio Architect
    Malcolm Henderson
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Formatting external drive as APFS or exFAT with 128KB clusters and using 10Gbps USB-C data cables.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Format the external SSD on a Mac as APFS for optimal sequential write consistency.
    2. Ensure cable is rated for 10Gbps or 20Gbps (USB 3.2 Gen 2×2); in-box white charging cables are USB 2.0 (40MB/s).
    3. Use drives with sustained non-SLC cache write capabilities (e.g. SanDisk Extreme Pro v2 or Crucial T700 enclosures).

    Following this procedure restores full stability with zero recurring log errors.

    Apple Vision Pro (1TB) | Zeiss Optical Inserts | Melbourne, VIC
    Apple Certified Support Professional (ACSP) | Audio Unit & CoreAudio Architect
Viewing 3 posts - 1 through 3 (of 3 total)